---
title: "Andersen EV chargers in Peterborough | 4.7 Star · NAPIT · From £750"
description: "Andersen EV charger fitting and repair in Peterborough: A2 and A3 units on their own circuit, tested and linked to the Konnect+ app before the first…"
canonical: "https://lightingelectrical.co.uk/brands/andersen"
---

# Andersen EV chargers in Peterborough

> Andersen EV charger fitting and repair in Peterborough: A2 and A3 units on their own circuit, tested and linked to the Konnect+ app before the first…

Lighting Electrical fits and repairs Andersen A2 and A3 EV chargers in Peterborough, setting each one up in the Konnect+ app and leaving it on its own tested circuit.

## Andersen A2 and A3 chargers we install and fix

Andersen makes home chargers for electric cars, controlled through its Konnect+ app. We mount new Andersen units, move existing ones, trace their faults and check them over, and each charger runs from a circuit of its own.
- **Andersen A2, tethered or with a socket:** The A2 comes with a fixed lead or a Type 2 socket for your own cable. On the tethered version the lead winds round the body for storage, so we leave clear wall space on each side. Its front panel comes in a range of colours and wood finishes.
- **Andersen A3 and the load sensor:** The A3 is a slimmer Andersen unit run from the same app. With either model we clip a load sensor round the meter tails, the thick cables between meter and board, so the charger eases off when the house draws heavily.
- **Andersen faults we put right:** An Andersen shows no numbered codes on the unit. The status light colour and the message in Konnect+ tell us where to start. We fix units that drop offline, cut out on a PEN fault, which is a broken neutral and earth in the street cable, trip their breaker as a charge begins or have a damaged lead.
- **What an Andersen service covers:** We check the panel seals and cable gland for water, look over the lead and connector for wear, and test the breaker and earth leakage protection feeding the unit. Then we confirm the sensor reading and the firmware version in the app.

[Andersen's website](https://andersen-ev.com)

## What happens to an Andersen charger in each service
- [EICR](https://lightingelectrical.co.uk/services/eicr): from £150
- [Consumer unit replacement](https://lightingelectrical.co.uk/services/fuse-board-replacement): from £450
- [House rewiring](https://lightingelectrical.co.uk/services/house-rewiring): from £2,400
- [Electrical fault finding](https://lightingelectrical.co.uk/services/electrical-fault-finding): from £75 an hour
- [Lighting installation](https://lightingelectrical.co.uk/services/lighting-installation): from £65
- [Andersen EV charger installation](https://lightingelectrical.co.uk/services/ev-charger-installation): from £750
- [Socket installation](https://lightingelectrical.co.uk/services/sockets-and-switches): from £85
- [Emergency electrician](https://lightingelectrical.co.uk/services/emergency-electrician): from £90 an hour
- [Electrical testing and certificates](https://lightingelectrical.co.uk/services/testing-and-certificates): from £95
- [Smoke alarm installation](https://lightingelectrical.co.uk/services/fire-and-smoke-alarms): from £110
- [Appliance and heating connections](https://lightingelectrical.co.uk/services/appliance-connections): from £120
- [Solar panel and battery storage installation](https://lightingelectrical.co.uk/services/solar-and-battery-storage): from £5,500
- [Forklift charger installation](https://lightingelectrical.co.uk/services/forklift-charger-installation): from £700
- [Commercial Lighting Installation](https://lightingelectrical.co.uk/services/commercial-office-lighting): from £65
- [Starlink installation](https://lightingelectrical.co.uk/services/starlink-installation): from £350
- [Light switch or dimmer replacement](https://lightingelectrical.co.uk/services/light-switch-or-dimmer-replacement): from £60
- [Minor works certificate](https://lightingelectrical.co.uk/services/minor-works-certificate): from £95
- [Extractor fan installation](https://lightingelectrical.co.uk/services/extractor-fan-installation): from £180
- [Electric shower installation](https://lightingelectrical.co.uk/services/electric-shower-installation): from £220
- [Emergency lighting test & certificate](https://lightingelectrical.co.uk/services/emergency-lighting-test-certificate): from £150
- [Immersion heater repair](https://lightingelectrical.co.uk/services/immersion-heater-repair): from £70 an hour
- [Battery storage installation](https://lightingelectrical.co.uk/services/battery-storage-installation): from £4,500
- [Fire alarm system installation](https://lightingelectrical.co.uk/services/fire-alarm-system-installation): from £1,400
- [Cherry picker hire](https://lightingelectrical.co.uk/services/cherry-picker-hire)

## Why is my Andersen charger off with the rest of the house?
- **[No power in the whole house](https://lightingelectrical.co.uk/problems/no-power-in-house):** An Andersen goes dark along with everything else in a full outage. We check the main switch, the RCDs and the street supply, switch the charger breaker on last and confirm the unit reconnects to Konnect+.

## Andersen EV charger questions

### Can you fit a tethered Andersen A2 with the cable wrapped round it?

Yes. The tethered A2 stores its lead by winding it round the body, so we mount it with space on each side for that. It goes on a dedicated circuit and is tested before the first charge.

### Does an Andersen charger need an earth rod?

Usually not. Andersen chargers include PEN fault protection, which stops the charge if the combined neutral and earth in the street cable fails. We test the earthing at the meter before confirming it for your supply.

### Why has my Andersen dropped out of the Konnect+ app?

The charger has lost its internet link, often from weak wifi at the wall or a changed router password. We check the signal at the unit and test the circuit, then link the charger to the app again.

### Can you move my Andersen charger to another wall?

Yes. We take the unit down, make the old feed safe and run a new circuit to the new spot. The charger is tested again and relinked in Konnect+ before you use it.

### Will my fuse board take an Andersen charger?

It needs a spare way and a main fuse that can carry the charger alongside the rest of the house. The load sensor lets the Andersen slow down when the house is busy, which often avoids a supply upgrade. A full board is priced as a separate job.

## Business facts
- Service area: Peterborough, Colchester, Witham, Maldon, Wivenhoe, Tiptree, Kelvedon, West Mersea, Stanway, Brightlingsea, Coggeshall, Marks Tey, Dedham, Rowhedge, Great Horkesley, Heybridge, Silver End, Stamford, Whittlesey, Oundle, Huntingdon, Manningtree
- Calls: Calls answered 24/7
- Phone: +447414545781
- Email: team@lightingelectrical.co.uk
- Insurance: Public liability £2M, Employers' liability £10M, Professional indemnity £500K

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
