---
title: "Hager consumer units in Peterborough | 4.7 Star · NAPIT · From £450"
description: "Hager consumer units in Peterborough: Design 10 boards fitted, RCBO and AFDD trips traced, boards tested and certified by a NAPIT registered electrician."
canonical: "https://lightingelectrical.co.uk/brands/hager"
---

# Hager consumer units in Peterborough

> Hager consumer units in Peterborough: Design 10 boards fitted, RCBO and AFDD trips traced, boards tested and certified by a NAPIT registered electrician.

Lighting Electrical fits and replaces Hager consumer units in Peterborough, putting each circuit on its own RCBO so one fault switches off one circuit, not the whole house.

## Which Hager consumer units do we fit and repair?

We fit Hager metal consumer units in homes and Hager distribution boards in shops and workshops. We also trace trips and test the devices inside them. Every board is tested before the power goes back on.
- **Hager Design 10 metal consumer units:** Home boards go in a metal enclosure, because the wiring regulations ask for a non combustible board in a dwelling. We fill it with Hager RCBOs. Each RCBO is a breaker and an earth leakage device in one, so a single circuit trips on its own.
- **Hager arc fault and surge devices:** Where the board needs them, we add a Hager surge protection device, which shields electronics from voltage spikes. We also fit arc fault detection devices, called AFDDs, which cut a circuit when they sense arcing at a loose joint or a damaged cable.
- **Hager trips and fault indicators:** We trace an RCD or RCBO that will not reset and a main switch that keeps dropping out. On a Hager AFDD, a small indicator light shows the cause of the last trip. Testing finds the circuit behind the trip before any device is swapped.
- **What a Hager board service involves:** A consumer unit has no yearly service. We check that terminals are tight and look for heat marks on the busbar, the copper bar that feeds the breakers. Then we time each RCD trip and show you the test button to press every three months.

[Hager's website](https://hager.com/uk)

## What do we do on Hager boards in each service?
- [EICR](https://lightingelectrical.co.uk/services/eicr): from £150
- [Hager consumer unit replacement](https://lightingelectrical.co.uk/services/fuse-board-replacement): from £450
- [House rewiring](https://lightingelectrical.co.uk/services/house-rewiring): from £2,400
- [Electrical fault finding](https://lightingelectrical.co.uk/services/electrical-fault-finding): from £75 an hour
- [Lighting installation](https://lightingelectrical.co.uk/services/lighting-installation): from £65
- [EV charger installation](https://lightingelectrical.co.uk/services/ev-charger-installation): from £750
- [Socket installation](https://lightingelectrical.co.uk/services/sockets-and-switches): from £85
- [Emergency electrician](https://lightingelectrical.co.uk/services/emergency-electrician): from £90 an hour
- [Electrical testing and certificates](https://lightingelectrical.co.uk/services/testing-and-certificates): from £95
- [Smoke alarm installation](https://lightingelectrical.co.uk/services/fire-and-smoke-alarms): from £110
- [Appliance and heating connections](https://lightingelectrical.co.uk/services/appliance-connections): from £120
- [Solar panel and battery storage installation](https://lightingelectrical.co.uk/services/solar-and-battery-storage): from £5,500
- [Forklift charger installation](https://lightingelectrical.co.uk/services/forklift-charger-installation): from £700
- [Commercial Lighting Installation](https://lightingelectrical.co.uk/services/commercial-office-lighting): from £65
- [Starlink installation](https://lightingelectrical.co.uk/services/starlink-installation): from £350
- [Light switch or dimmer replacement](https://lightingelectrical.co.uk/services/light-switch-or-dimmer-replacement): from £60
- [Minor works certificate](https://lightingelectrical.co.uk/services/minor-works-certificate): from £95
- [Extractor fan installation](https://lightingelectrical.co.uk/services/extractor-fan-installation): from £180
- [Electric shower installation](https://lightingelectrical.co.uk/services/electric-shower-installation): from £220
- [Emergency lighting test & certificate](https://lightingelectrical.co.uk/services/emergency-lighting-test-certificate): from £150
- [Immersion heater repair](https://lightingelectrical.co.uk/services/immersion-heater-repair): from £70 an hour
- [Battery storage installation](https://lightingelectrical.co.uk/services/battery-storage-installation): from £4,500
- [Fire alarm system installation](https://lightingelectrical.co.uk/services/fire-alarm-system-installation): from £1,400
- [Cherry picker hire](https://lightingelectrical.co.uk/services/cherry-picker-hire)

## Why has the whole house lost power?
- **[No power in the whole house](https://lightingelectrical.co.uk/problems/no-power-in-house):** Look at the Hager board first. If the main switch or an RCD has dropped, reset it once. If it trips again, we trace the circuit that keeps switching it off.

## Hager consumer unit questions

### Can you replace my old fuse box with a Hager consumer unit?

Yes. We remove the old fuse box and fit a Hager metal consumer unit with RCBOs. Every circuit is tested and marked before the power goes back on, and the change is notified through NAPIT.

### My Hager RCD keeps tripping. Is the board faulty?

Rarely. A trip usually means the device has caught a fault further along a circuit. We test each circuit to find the appliance, cable or accessory that is leaking current before we change anything at the board.

### Do I need arc fault devices in my Hager board?

The wiring regulations recommend AFDDs on many new circuits, especially those feeding sockets. We look at the house and its circuits, then tell you which circuits would gain from one.

### Can my Hager board take an EV charger?

Often it can, if there is a spare way and the supply can carry the extra load. We check the incoming supply, the earthing and the free ways first. If the board is full, a small Hager enclosure beside it can take the charger circuit.

### How often should I test the RCDs in my Hager board?

Press the test button marked T every three months. The device should switch off straight away. If it stays on, the RCD needs testing and replacing before that circuit is used again.

## Business facts
- Service area: Peterborough, Colchester, Witham, Maldon, Wivenhoe, Tiptree, Kelvedon, West Mersea, Stanway, Brightlingsea, Coggeshall, Marks Tey, Dedham, Rowhedge, Great Horkesley, Heybridge, Silver End, Stamford, Whittlesey, Oundle, Huntingdon, Manningtree
- Calls: Calls answered 24/7
- Phone: +447414545781
- Email: team@lightingelectrical.co.uk
- Insurance: Public liability £2M, Employers' liability £10M, Professional indemnity £500K

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
