---
title: "Hypervolt EV chargers in Peterborough | 4.7 Star · NAPIT · From £750"
description: "Hypervolt EV charger fitting and repair in Peterborough: dedicated circuit, CT clamp, solar mode setup, fault tracing and a certificate for the work."
canonical: "https://lightingelectrical.co.uk/brands/hypervolt"
---

# Hypervolt EV chargers in Peterborough

> Hypervolt EV charger fitting and repair in Peterborough: dedicated circuit, CT clamp, solar mode setup, fault tracing and a certificate for the work.

Lighting Electrical installs and repairs Hypervolt home EV chargers in Peterborough, fitting each unit on a dedicated circuit with a CT clamp and handing it over tested and linked to the Hypervolt app.

## Hypervolt chargers we install, fix and service

Hypervolt makes smart home chargers for electric cars. We mount them, wire them on their own circuit, set up the clamp that measures household demand, trace their faults and check them over.
- **Hypervolt Home 3 and Home 3 Pro:** Both are 7.4kW chargers for a single phase home supply. Each comes with a fixed lead or with a Type 2 socket for your own cable. We run a dedicated feed from the consumer unit, the panel of breakers inside the house, and connect the charger to the app over wifi.
- **Solar mode and load balancing:** A CT clamp is a clip on sensor around the cables leaving the meter. It tells the Hypervolt how much the house is drawing, so charging slows before the main fuse is overloaded. With panels on the roof, the same clamp lets the charger run from surplus generation.
- **Faults and warnings we fix:** The light ring on the front changes colour to show the charger's state, and the app names the fault. We fix chargers stuck offline, PEN fault lockouts, DC leakage trips, breakers that drop as a charge begins, and worn leads or plugs. A PEN fault is a break in the shared neutral and earth from the street.
- **What a Hypervolt service involves:** Software reaches the charger through the app, so our check covers the hardware. We look at the lead and plug for cracks, the glands and casing for water, and time the trip of the RCBO feeding it. An RCBO is a combined breaker and earth leakage device. We also compare the clamp reading with the meter.

[Hypervolt's website](https://hypervolt.co.uk)

## What does each electrical service involve on a Hypervolt charger?
- [EICR](https://lightingelectrical.co.uk/services/eicr): from £150
- [Consumer unit replacement](https://lightingelectrical.co.uk/services/fuse-board-replacement): from £450
- [House rewiring](https://lightingelectrical.co.uk/services/house-rewiring): from £2,400
- [Electrical fault finding](https://lightingelectrical.co.uk/services/electrical-fault-finding): from £75 an hour
- [Lighting installation](https://lightingelectrical.co.uk/services/lighting-installation): from £65
- [Hypervolt EV charger installation](https://lightingelectrical.co.uk/services/ev-charger-installation): from £750
- [Socket installation](https://lightingelectrical.co.uk/services/sockets-and-switches): from £85
- [Emergency electrician](https://lightingelectrical.co.uk/services/emergency-electrician): from £90 an hour
- [Electrical testing and certificates](https://lightingelectrical.co.uk/services/testing-and-certificates): from £95
- [Smoke alarm installation](https://lightingelectrical.co.uk/services/fire-and-smoke-alarms): from £110
- [Appliance and heating connections](https://lightingelectrical.co.uk/services/appliance-connections): from £120
- [Solar panel and battery storage installation](https://lightingelectrical.co.uk/services/solar-and-battery-storage): from £5,500
- [Forklift charger installation](https://lightingelectrical.co.uk/services/forklift-charger-installation): from £700
- [Commercial Lighting Installation](https://lightingelectrical.co.uk/services/commercial-office-lighting): from £65
- [Starlink installation](https://lightingelectrical.co.uk/services/starlink-installation): from £350
- [Light switch or dimmer replacement](https://lightingelectrical.co.uk/services/light-switch-or-dimmer-replacement): from £60
- [Minor works certificate](https://lightingelectrical.co.uk/services/minor-works-certificate): from £95
- [Extractor fan installation](https://lightingelectrical.co.uk/services/extractor-fan-installation): from £180
- [Electric shower installation](https://lightingelectrical.co.uk/services/electric-shower-installation): from £220
- [Emergency lighting test & certificate](https://lightingelectrical.co.uk/services/emergency-lighting-test-certificate): from £150
- [Immersion heater repair](https://lightingelectrical.co.uk/services/immersion-heater-repair): from £70 an hour
- [Battery storage installation](https://lightingelectrical.co.uk/services/battery-storage-installation): from £4,500
- [Fire alarm system installation](https://lightingelectrical.co.uk/services/fire-alarm-system-installation): from £1,400
- [Cherry picker hire](https://lightingelectrical.co.uk/services/cherry-picker-hire)

## Why has my Hypervolt gone dark in a power cut?
- **[No power in the whole house](https://lightingelectrical.co.uk/problems/no-power-in-house):** A dark light ring during a full outage means the charger has lost its supply along with the house. If the street is lit, we look for a tripped main switch or RCD. Once power returns, the Hypervolt should rejoin wifi by itself, and we check that it does.

## Hypervolt charger questions

### Can you install a Hypervolt Home 3 charger?

Yes. We fit it on a dedicated circuit with its own RCBO, put a CT clamp on the meter tails and link the charger to the Hypervolt app. You choose the fixed lead or the socket version before the unit is ordered.

### Does a Hypervolt need an earth rod?

Usually not. The charger has PEN fault detection built in, so it stops charging if the street neutral and earth fail. We test the earthing at the property first and say if anything more is needed.

### Why is my Hypervolt stuck offline in the app?

It has lost its wifi link, often after a router change or because the signal at the wall is weak. We check the signal at the charger, test its circuit and reconnect it to the app.

### Can a Hypervolt charge my car from my solar panels?

Yes, once the CT clamp sits where it reads power flowing to and from the grid. Solar mode then sends spare generation to the car. We set it up and show you how to change modes in the app.

### Can you move my Hypervolt when I move house?

Yes. We disconnect it, leave the old circuit safe and fit the charger on a new dedicated feed at your new address. The clamp goes on the new meter tails and the charger is linked to the app again.

## Business facts
- Service area: Peterborough, Colchester, Witham, Maldon, Wivenhoe, Tiptree, Kelvedon, West Mersea, Stanway, Brightlingsea, Coggeshall, Marks Tey, Dedham, Rowhedge, Great Horkesley, Heybridge, Silver End, Stamford, Whittlesey, Oundle, Huntingdon, Manningtree
- Calls: Calls answered 24/7
- Phone: +447414545781
- Email: team@lightingelectrical.co.uk
- Insurance: Public liability £2M, Employers' liability £10M, Professional indemnity £500K

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
