---
title: "myenergi EV chargers in Peterborough | 4.7 Star · NAPIT · From £750"
description: "myenergi zappi EV charger fitting and repair in Peterborough by Lighting Electrical, with a dedicated tested circuit, CT clamp set up and a certificate."
canonical: "https://lightingelectrical.co.uk/brands/myenergi"
---

# myenergi EV chargers in Peterborough

> myenergi zappi EV charger fitting and repair in Peterborough by Lighting Electrical, with a dedicated tested circuit, CT clamp set up and a certificate.

Lighting Electrical fits and repairs myenergi zappi EV chargers in Peterborough, leaving each charger on its own tested circuit and set to charge the car from spare solar power where the house has panels.

## Which myenergi chargers do we fit and repair?

myenergi makes the zappi, a home EV charger that can fill the car from the grid or from spare solar power. We fit new zappi units, move existing ones and trace faults on them.
- **zappi chargers, tethered and untethered:** We fit the zappi in tethered form, with the lead fixed to the unit, or untethered, with a socket for your own cable. Most homes take the 7kW single phase model. The 22kW model needs a three phase supply, which we check before anything is ordered.
- **CT clamps, harvi and the myenergi hub:** A CT clamp is a clip on sensor around the meter tail that tells the zappi how much power the house imports or exports. Where the meter is too far away for a cable, a harvi sends that reading wirelessly. The hub plugs into your router for the app and firmware updates.
- **zappi faults and screen messages we fix:** We fix PEN faults, where the zappi has switched off because the supply voltage left its safe band. We also fix earth leakage trips, a charger stuck waiting for surplus because a CT clamp faces the wrong way, and a hub that has lost its link to the app.
- **What servicing a zappi involves:** We tighten the terminals, check the cable gland and casing seals, and test the earth leakage protection at the charger. Then we check the CT readings match the meter and that the firmware is current in the myenergi app.

[myenergi's website](https://www.myenergi.com)

## What we do on a zappi in each service
- [EICR](https://lightingelectrical.co.uk/services/eicr): from £150
- [Consumer unit replacement](https://lightingelectrical.co.uk/services/fuse-board-replacement): from £450
- [House rewiring](https://lightingelectrical.co.uk/services/house-rewiring): from £2,400
- [Electrical fault finding](https://lightingelectrical.co.uk/services/electrical-fault-finding): from £75 an hour
- [Lighting installation](https://lightingelectrical.co.uk/services/lighting-installation): from £65
- [myenergi EV charger installation](https://lightingelectrical.co.uk/services/ev-charger-installation): from £750
- [Socket installation](https://lightingelectrical.co.uk/services/sockets-and-switches): from £85
- [Emergency electrician](https://lightingelectrical.co.uk/services/emergency-electrician): from £90 an hour
- [Electrical testing and certificates](https://lightingelectrical.co.uk/services/testing-and-certificates): from £95
- [Smoke alarm installation](https://lightingelectrical.co.uk/services/fire-and-smoke-alarms): from £110
- [Appliance and heating connections](https://lightingelectrical.co.uk/services/appliance-connections): from £120
- [Solar panel and battery storage installation](https://lightingelectrical.co.uk/services/solar-and-battery-storage): from £5,500
- [Forklift charger installation](https://lightingelectrical.co.uk/services/forklift-charger-installation): from £700
- [Commercial Lighting Installation](https://lightingelectrical.co.uk/services/commercial-office-lighting): from £65
- [Starlink installation](https://lightingelectrical.co.uk/services/starlink-installation): from £350
- [Light switch or dimmer replacement](https://lightingelectrical.co.uk/services/light-switch-or-dimmer-replacement): from £60
- [Minor works certificate](https://lightingelectrical.co.uk/services/minor-works-certificate): from £95
- [Extractor fan installation](https://lightingelectrical.co.uk/services/extractor-fan-installation): from £180
- [Electric shower installation](https://lightingelectrical.co.uk/services/electric-shower-installation): from £220
- [Emergency lighting test & certificate](https://lightingelectrical.co.uk/services/emergency-lighting-test-certificate): from £150
- [Immersion heater repair](https://lightingelectrical.co.uk/services/immersion-heater-repair): from £70 an hour
- [Battery storage installation](https://lightingelectrical.co.uk/services/battery-storage-installation): from £4,500
- [Fire alarm system installation](https://lightingelectrical.co.uk/services/fire-alarm-system-installation): from £1,400
- [Cherry picker hire](https://lightingelectrical.co.uk/services/cherry-picker-hire)

## Can a zappi fault cut power to the whole house?
- **[No power in the whole house](https://lightingelectrical.co.uk/problems/no-power-in-house):** On older boards where one RCD covers several circuits, a leak at the zappi can switch off the whole house. We check the main switch and the street first, then isolate the charger circuit and test it.

## myenergi zappi questions

### Can a zappi charge my car from my solar panels?

Yes. In Eco or Eco+ mode the zappi uses the surplus the CT clamp measures, so the car takes power that would otherwise go back to the grid. Fast mode charges at full rate from the grid whatever the panels are doing.

### Do I need an earth rod for a zappi?

Usually not. The zappi has PEN fault protection built in, which switches off charging if the combined neutral and earth in the supply cable fails. We check the earthing arrangement at the meter before fitting.

### What does a PEN fault message on my zappi mean?

The zappi has seen the supply voltage move outside its safe band and has stopped charging. A loose neutral or low voltage at busy times can cause it. We measure at the meter and at the charger to find which.

### Can you move my zappi to a different wall?

Yes. We take the charger down, run new cable to the new position and refit it. The circuit is tested again and the CT clamp is checked before the charger goes back into use.

### My meter is a long way from the charger. Can a zappi still use solar?

Yes. A harvi clips around the meter tail and sends the reading to the zappi wirelessly, so no cable is needed between them. We pair it during the visit and check the readings match the meter.

## Business facts
- Service area: Peterborough, Colchester, Witham, Maldon, Wivenhoe, Tiptree, Kelvedon, West Mersea, Stanway, Brightlingsea, Coggeshall, Marks Tey, Dedham, Rowhedge, Great Horkesley, Heybridge, Silver End, Stamford, Whittlesey, Oundle, Huntingdon, Manningtree
- Calls: Calls answered 24/7
- Phone: +447414545781
- Email: team@lightingelectrical.co.uk
- Insurance: Public liability £2M, Employers' liability £10M, Professional indemnity £500K

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
