---
title: "Buying a house with old electrics | 4.7 Star · NAPIT · From £60"
description: "Old electrics when buying a house in Peterborough are checked with an EICR from Lighting Electrical. We test the fixed wiring and leave the written…"
canonical: "https://lightingelectrical.co.uk/problems/buying-house-old-electrics"
---

# Buying a house with old electrics

> Old electrics when buying a house in Peterborough are checked with an EICR from Lighting Electrical. We test the fixed wiring and leave the written…

An EICR, the written electrical installation condition report, is how old electrics are checked before you buy. Lighting Electrical in Peterborough tests the fixed wiring and leaves that report with you.

## Why do old electrics worry a buyer?

Old electrics worry a buyer when the consumer unit still uses rewirable fuses, the cables are rubber or fabric, or the earthing is missing. The EICR names each of those findings on the circuits we test.
- **Rewirable fuses and no residual current device:** A rewirable fuse is a carrier with fuse wire, not a switch you reset. An RCD, a residual current device, cuts the supply when current leaks to earth. A consumer unit with wire fuses and no RCD is a finding the EICR records against the circuits it protects.
- **Rubber cable or fabric cable:** Older lighting and socket cables used rubber insulation or a fabric wrap. That covering cracks, so the conductors sit closer to each other and to earth. We record cracked insulation where it is visible and where the tests show leakage.
- **Earthing or bonding that is missing:** Earthing gives fault current a path back to the consumer unit so a protective device can open. Bonding joins metal water and gas pipes to that earth. The EICR states what is present at the board and at the pipes.
- **A lighting circuit that has been added to:** A lighting circuit leaves the consumer unit and feeds the fixed lights. Extra lights joined on over the years add joints and raise the load on that cable. The inspection tests the circuit.
- **Sockets beyond what the supply can feed:** Every socket draws from the supply that enters the house. We check the earthing, the bonding and whether that supply can carry another load before we price any further work. The EICR shows how the sockets already there are protected.

## What can I look at safely before I buy?

You can look at the closed consumer unit, the sockets and any cable already in view. You leave every cover on. You keep your hands off bare conductors.
- **The consumer unit with the cover shut:** Stand in front of the closed cover. Wire fuses, a row of breakers, or a button marked T for test show the style of protection. Every screw stays in the cover.
- **Sockets, switches and lights you can see:** Look for brown marks, cracked plastic and round pin sockets. A warm face or a smell of burning is a reason to stop using that point. The faceplate stays screwed on.
- **Cable that is already in view:** Fabric braid or dull rubber at a loft hatch, a meter cupboard or an open pendant means older cable is still in use. Looking is enough. You leave the cable where it is.
- **An electrical report already in the papers:** A previous EICR in the seller pack has a date and a list of observations. You read the date and the overall result. We test the installation when you want a report from this visit.

## When should I book an EICR on a house I am buying?

Book the EICR when a survey, a solicitor or a lender asks about the electrics, or when you have seen wire fuses or damaged cable. Book Now.
- **The survey mentions the electrics:** A home survey that flags the consumer unit, the earthing or the cable is the moment for an EICR. The report gives your solicitor the test results on the fixed wiring.
- **A lender or solicitor asks for a report:** Some lenders ask for an EICR before exchange. We inspect the installation and issue the report for that file. Repairs they later want are priced on their own after you accept them.
- **Wire fuses or burnt fittings are in view:** Wire fuses, scorched sockets or fabric cable are reasons to book while you still have access to the house. We test those circuits with the supply off for part of the visit.
- **The seller pack has no electrical report:** A house with no EICR in the papers leaves the fixed wiring without test results in your file. The visit produces a dated report of the installation.

## What happens on an EICR visit before you buy?

We inspect and test the fixed wiring, then we complete the EICR on site. The supply is off while each circuit is tested.
- **The rooms and the consumer unit:** We meet the person who can let us in and confirm the address. We walk the rooms and note the consumer unit, the sockets, the switches and the fixed lights. You can show us anything the survey already marked.
- **Dead tests and live tests:** We switch the supply off and test each circuit dead. Continuity testing checks that the earth conductor still joins the points on the circuit. An insulation test checks whether the conductors leak to each other or to earth. Live tests follow, and we put each circuit back on.
- **C1, C2, C3 and FI on the report:** Each observation is marked C1, C2, C3 or FI. C1 means danger present and we make that circuit safe before we leave. C2 means potentially dangerous and the report is unsatisfactory. C3 means improvement recommended. FI means that point needs further investigation.
- **The report and a later repair price:** We finish the EICR on site and talk through any C1 or C2 items. You keep the report. Where a repair is needed, we write a separate price after you accept it. Fuse board replacement and house rewiring stay their own jobs.

## What does the EICR price cover?

The price covers the inspection and test of the fixed wiring and the written EICR. A larger house, more circuits, an outbuilding or a second consumer unit takes more time and changes the price. Repair work sits outside the inspection price. We price that work in writing after you accept it.
- EICR (electrical safety report): from £150
- Extra circuits, an outbuilding or a second consumer unit add time and change the price.
- Fuse board replacement and house rewiring are separate written prices when the tests show the board or the cable has failed.
- The EICR is completed under our NAPIT registration.

## Questions about old electrics when you buy

### Will an old EICR from the seller be enough?

A seller's EICR records their installation on the date it was signed. We carry out a new inspection when you want results on the wiring as it stands for your purchase. You keep our report at the end of the visit.

### What do C1, C2 and C3 mean for my purchase?

C1 is danger present and that circuit is made safe before we leave. C2 is potentially dangerous and the EICR is unsatisfactory. C3 means improvement recommended, so the report can remain satisfactory.

### Do I have to be at the house?

Someone with access has to let us in and stay while the power is off for the tests. If you are buying, that person may be you, the seller or the agent who holds the keys. We talk through the findings with whoever is there and you receive the report.

### What happens if the report is unsatisfactory?

We quote the repairs in writing after the EICR. You can book that work with us or take the report to another electrician. The inspection price stays separate from the repair price.

### Do old electrics mean the house needs a rewire?

House rewiring replaces the cable when the tests show it has failed through the installation. A sound cable stays in place. Fuse board replacement is the job when the consumer unit has failed and the cable tests are sound.

## Related problems
- [Aluminium wiring in the house](https://lightingelectrical.co.uk/problems/aluminium-wiring): Aluminium cable overheats at loose joints. We test it, write the electrical installation condition report, and price any copper replacement separately.
- [House not up to electrical regulations](https://lightingelectrical.co.uk/problems/house-not-up-to-electrical-regs): An EICR names the parts of the fixed wiring that fall short of the current rules, and repairs are priced afterwards.
- [How to tell if a house needs rewiring](https://lightingelectrical.co.uk/problems/signs-house-needs-rewiring): The house needs rewiring when an EICR shows the cables or the fuse board cannot be made safe by repairing one circuit.
- [Is my metal fuse box safe?](https://lightingelectrical.co.uk/problems/metal-fuse-box): A metal cover does not make a fuse box safe. The devices, earthing and cables settle that, and an EICR records the result.
- [No electrical certificate for the property](https://lightingelectrical.co.uk/problems/no-electrical-certificate): An EICR of the fixed wiring replaces a missing electrical certificate and leaves you the written report.
- [Part P non compliance: what to do](https://lightingelectrical.co.uk/problems/part-p-non-compliance): Unnotified or unsafe fixed wiring in a home is Part P non compliance. We inspect it and issue a written EICR.

## Sources
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [Electrical safety standards in the private and social rented sectors](https://www.gov.uk/government/publications/electrical-safety-standards-in-the-private-and-social-rented-sectors-guidance/electrical-safety-standards-in-the-private-and-social-rented-sectors-guidance)
- [Electrical Safety First: Best Practice Guide 4](https://www.electricalsafetyfirst.org.uk/media/2depcuen/best-practice-guide-4-issue-6.pdf)

Updated 2026-11-16.

[EICR](https://lightingelectrical.co.uk/services/eicr)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
