---
title: "Why is my consumer unit hot? | 4.7 Star · NAPIT approved · From £60"
description: "A hot fuse board in Peterborough means a connection inside the consumer unit is overheating. Lighting Electrical isolates it and names the failed part."
canonical: "https://lightingelectrical.co.uk/problems/consumer-unit-hot"
---

# Why is my consumer unit hot?

> A hot fuse board in Peterborough means a connection inside the consumer unit is overheating. Lighting Electrical isolates it and names the failed part.

A hot consumer unit means a loose joint or a failing device inside the fuse board is overheating. Lighting Electrical in Peterborough isolates that board and names the hot part.

## Why is my consumer unit hot?

A consumer unit gets hot when a connection or a switch inside it is failing. The heat stays in that part. A breaker that is only faintly warm under a heavy load is not this fault.
- **A loose terminal on the main switch:** The main switch is the large switch that turns the whole board off. A loose terminal on it squeezes the supply through a tiny contact. That contact heats the switch and the cover above it.
- **A worn breaker or RCD:** A breaker is the small switch for one circuit. An RCD opens when current leaks to earth, the path that carries a fault away from you. Worn contacts in either device heat that switch and the plastic next to it.
- **A loose clip on the busbar:** The busbar is the metal strip that feeds each breaker. A loose clip on that strip heats one part of the board. Breakers further along can stay cool.
- **A loose end on a meter tail:** Meter tails are the thick cables that run from the meter into the main switch. A loose end on a tail heats the top of the consumer unit. The smaller breakers can still look untouched.
- **Damp across a terminal:** Damp on a terminal lets current creep across the plastic. The cover turns brown and warms up. A smell of hot plastic comes with that heat.

## What can I check on a hot fuse board?

You can check the closed cover, the smell, the noise and the switch handles on the front. Every screw stays in and every cable stays untouched.
- **Brown marks or a burning smell:** Look at the cover while it is still shut. Brown stains, soft plastic or a smell of burning mean a joint is charring. Leave every screw where it is.
- **Where the outside of the cover is warm:** Put the back of your hand on the outside of the cover for a moment. Warmth over one small switch points to that device. Warmth along the top points to the main switch or the meter tails.
- **Large loads at their own wall switches:** Switch the shower, the cooker and any EV charger off at the switch on the wall. Note if the board was hot while those loads were running. Pull portable plugs out and leave them out.
- **A buzz or a crackle:** A buzz or a crackle is arcing, which means a spark is jumping at a loose joint. Turn the main switch off by its handle. Do not take the cover off to look for the spark.

## When should I book for a hot consumer unit?

Book Now when the cover is hot, when you smell burning, or when the closed case buzzes. A cool cover and a breaker that is only slightly warm can wait for a planned test.
- **Smoke, a burning smell or soft plastic:** Smoke, a burning smell or soft plastic means the board is unsafe to keep using. Turn the main switch off if you can reach the handle without forcing anything. Book Now and keep the cover closed.
- **One switch too hot to hold:** A breaker or RCD that is too hot to hold has a failed contact or a loose wire at that device. Leave that switch off. Other circuits stay in use only while the rest of the cover is cool and silent.
- **Heat across the whole cover:** Heat over the whole cover, or heat at the main switch, sits on the supply into the home. Turn the main switch off. Do not reset a breaker that opens again at once.

## What happens on a visit for a hot consumer unit?

We isolate the hot part, find the joint that is heating, and leave every unsafe circuit off. A repair starts only after you accept it.
- **The warm patch on the closed board:** We look at the closed consumer unit with you and note the smell, any noise and the warm patch. We switch off the hot device, or the main switch when the whole case is hot. Cool quiet circuits stay on.
- **A dead test before the cover comes off:** We prove the isolated part is dead before a screw is removed. Then we look for a brown terminal, a loose breaker, a hot busbar or a damaged meter tail. A device that tests sound stays fitted.
- **The failed part named before a repair:** We name the failed part before a repair starts. The repair goes ahead only after you accept it. If the case or several devices are burnt, fuse board replacement is written up as its own job.
- **Retest, certificate and the next price:** We test again after any repair. A minor works certificate records a change to a circuit and shows our NAPIT registration. Before a further price we check earthing, the bonding that links metal pipes to the board, and whether the supply can carry the load.

## What does a hot fuse board visit cost?

The emergency electrician price covers attendance at the property, the first tests on the hot consumer unit, and work to make the installation safe to leave. Longer tracing on the hot joint changes the price. A new breaker, a main switch or a fuse board replacement changes it as well.
- Emergency electrician (out of hours): from £90 an hour
- We fit a replacement breaker or main switch only after the test shows the fitted one has failed.
- Fuse board replacement is a separate written price when the case, the busbar or several devices have burnt.
- Later repair work is priced as Electrical Fault Finding & Repair, separate from the emergency electrician attendance.

## Questions about a hot consumer unit

### Should I switch the whole board off?

Yes. Switch it off when the top of the cover is hot, when you smell burning, or when the case buzzes. Use only the main switch handle, leave the screws in, and keep the board off until it has been tested.

### Is a slightly warm breaker a fault?

A breaker can feel faintly warm while its circuit works hard, as long as the cover around it stays cool. Heat you cannot touch, a burning smell, or a browned cover is a fault. Leave that device switched off.

### Will you replace the consumer unit on the first visit?

We replace the consumer unit on that visit only when the tests show the board has failed and you have accepted a separate price for fuse board replacement. Where one device has failed, we isolate it and leave a sound board in place. The replacement board is then its own job.

### What paperwork do I get after the repair?

A minor works certificate follows when we change a breaker, a main switch or a cable, and it carries our NAPIT registration. If we isolate the board and change nothing, we record the hot part and the test readings. An EICR inspects the whole installation and is booked separately.

### Can the rest of the house stay on?

Healthy circuits stay on when the heat is one device and the rest of the cover is cool and quiet. We switch off only the failed device in that case. The whole board stays off when the main switch or the full cover is hot.

## Related problems
- [Brown marks on a socket or plug](https://lightingelectrical.co.uk/problems/scorch-marks-on-socket): Brown marks on a socket or plug mean the connection has overheated, so that circuit stays off until it is tested.
- [Burning plastic smell from electrics](https://lightingelectrical.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell means the insulation on a live joint is getting hot, so that circuit stays switched off until it is tested.
- [Burning smell from a socket](https://lightingelectrical.co.uk/problems/burning-smell-from-socket): A burning smell from a socket means a connection is overheating and that circuit should stay off until it is tested.
- [Burning smell from the fuse box](https://lightingelectrical.co.uk/problems/burning-smell-from-fuse-box): A burning smell at the fuse box means a connection or device is overheating, so that circuit stays off until it is tested.
- [Electric shock from a light switch](https://lightingelectrical.co.uk/problems/electric-shock-from-light-switch): A shock from a light switch means the switch face is carrying current and that lighting circuit should be isolated.
- [Electric shock from the shower](https://lightingelectrical.co.uk/problems/electric-shock-from-shower): A shock from the shower means current is on the water, the case or the taps, so that circuit stays off until it is tested.

## Sources
- [Electrical Safety First: Best Practice Guides](https://www.electricalsafetyfirst.org.uk/resources-for-electricians/best-practice-guides/)
- [HSE: Electrical Safety at Work](https://www.hse.gov.uk/electricity/)
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)

Updated 2026-11-16.

[Emergency electrician](https://lightingelectrical.co.uk/services/emergency-electrician)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
