---
title: "One side of a double socket not working | 4.7 Star · NAPIT · From £60"
description: "One side of a double socket not working in Peterborough is tested by Lighting Electrical and the failed outlet is replaced with paperwork left with you."
canonical: "https://lightingelectrical.co.uk/problems/double-socket-one-side-not-working"
---

# One side of a double socket not working

> One side of a double socket not working in Peterborough is tested by Lighting Electrical and the failed outlet is replaced with paperwork left with you.

One side of a double socket goes dead when the contacts or switch on that outlet fail, while the other outlet still has power. Lighting Electrical in Peterborough tests the socket and replaces it when those parts have failed.

## Why does one side of a double socket stop working?

One side stops because the contacts, the switch or the link inside that outlet have failed. The other outlet still works because both outlets take power from the same terminals.
- **Burnt contacts on the dead side:** The contacts are the metal grips that hold the plug pins. A loose pin or a heavy load heats one set of grips until they stop passing current. The other outlet keeps working from the same terminals.
- **A failed switch on one outlet:** A switched double socket has a rocker for each outlet. A rocker is the small switch on the front. One rocker can fail or sit off while the other outlet stays live. The breaker, the switch on the fuse board for this circuit, stays up because the cable is still feeding the socket.
- **A broken link between the outlets:** A brass link joins the two outlets inside the socket. When that link cracks or was left out, one outlet loses power and the other stays live. The cable at the terminals can still be sound.
- **The plug in the dead outlet:** A dead appliance in one outlet can be the plug or the appliance, not the socket. Move a working lamp into the dead outlet. If the lamp lights, the first plug or appliance is the failed part and the socket stays on the wall.
- **Heat from one high load plug:** A heater, kettle or iron on one outlet loosens that side only. Brown marks form around those pin holes. The second outlet can still run a lamp because its own contacts are intact.

## What can I check on one dead socket side?

You can test the two outlets with a lamp, try each switch and look for heat or brown marks. You leave the faceplate screwed on and you leave the fuse board cover shut.
- **A lamp in each outlet:** Plug a lamp that already lights in another room into the dead outlet, then into the live outlet. The lamp off then on shows the fault is in one outlet. The lamp off in both shows a wider circuit fault.
- **The switch on the dead side:** Press the switch beside the dead outlet, then try the lamp again. If the socket has no switches, there is nothing to press. You do not unscrew the faceplate to look behind it.
- **Brown marks or a warm face:** Look at the pin holes on the dead side for brown marks. A warm face or a buzzing sound means stop using both outlets. Keep your hands off the screws and off the fuse board.
- **A socket nearby:** Try the same lamp in a nearby socket. A nearby socket that works means this double socket is the failed part. Every socket in the room dead points to the breaker or the cable, which is a different fault.

## When should I book for one dead socket side?

Book Now when a trusted lamp is dead in one outlet and live in the other, or when the socket is hot, brown, buzzing or knocking off the breaker.
- **One outlet fails a working lamp:** The lamp lights in the second outlet and stays off in the first. That pattern points to the contacts, the switch or the link. The fuse board is not the cause while one outlet still works, so Book Now for a test of this socket.
- **Heat, brown marks or a buzz:** Warm plastic, brown marks or a buzz mean the contacts are arcing. Arcing is a spark jumping across a loose joint. Unplug both outlets. Switch off the breaker for this socket if you know which switch it is.
- **The side switch does nothing:** You have pressed the rocker for the dead outlet and the lamp still stays off. The switch or the contacts have failed. The faceplate stays on the wall until the visit.
- **That outlet knocks off the breaker:** Plugging into the dead side opens the breaker and kills other sockets on that circuit. Unplug the lead and leave the breaker off. Leave the live side of this socket empty too.

## What happens on a double socket visit?

We isolate the circuit, test the dead outlet and replace the double socket when the contacts, switch or link have failed. Other circuits stay on.
- **Which outlet is dead:** We ask which outlet failed and what was plugged in. We switch off the breaker for that circuit and prove it is dead with a tester. The faceplate stays fixed until that test is done.
- **Tests with the faceplate off:** With the circuit dead we take off this faceplate only. We look at the terminals, the brass link and each switch. A socket that tests sound goes back on without a new part.
- **Fitting the replacement socket:** When the contacts, switch or link have failed we fit a new double socket on the same cables. The socket is an MK Electric or BG Electrical part when the test shows this one has failed. We turn the circuit on and check both outlets.
- **Paperwork and any further price:** Where the circuit is altered we issue a minor works certificate under our NAPIT registration. We check the earth path that clears a fault, and the bonds that join metal pipes to the fuse board, before we price any work beyond this socket.

## What does a double socket repair cost?

The price covers one quoted double socket: the test of the dead outlet and the fitting of the replacement. Chasing cable into a wall, a second point, and making good plaster or paint change the price because each is its own line. Kitchen, bathroom and outdoor sockets also change the price when they need extra protection, and that protection is named before work starts.
- Socket installation or replacement: from £85
- A second socket or a new switch on the same visit is written as its own line.
- Plaster, paint and chasing sit outside the socket figure so you can see the electrical work on its own.
- MK Electric or BG Electrical parts are added only when the test shows this double socket has failed.

## Questions about one dead side of a socket

### Do you replace the whole double socket?

Yes. Both outlets are one accessory, so the replacement is the whole double socket. That socket is the one quoted point. We test both outlets before the circuit is left on.

### If one side works, is the circuit healthy?

Power on the live outlet shows the breaker and the cable are feeding this socket. The failed part is the dead outlet, its switch or its link. We still check the earth path and the pipe bonds before any price for further work.

### Will the rest of the house lose power?

No. We switch off only the circuit that feeds this double socket. Lights and sockets on other breakers stay on. This circuit goes back on after the new socket tests correctly, and it stays off if it is unsafe to energise.

### What paperwork do I get after the repair?

A minor works certificate records the socket we changed and the tests we took, under our NAPIT registration. You receive it when the work is finished. An EICR, an Electrical Installation Condition Report for the whole installation, is a separate job with its own price.

### Should I use the outlet that still works?

Leave both outlets empty if the socket is warm, buzzing, cracked or brown. On a cool socket you can use the live outlet until the visit. Stop and unplug it if it heats up or the breaker opens.

## Related problems
- [Cracked plug socket](https://lightingelectrical.co.uk/problems/socket-cracked): A cracked plug socket stays unused until the face is replaced and the terminals behind it are tested.
- [Extension lead getting hot](https://lightingelectrical.co.uk/problems/overheating-extension-lead): A hot extension lead is overloaded, so the appliance needs a fixed socket instead of that lead.
- [Loose or wobbly plug socket](https://lightingelectrical.co.uk/problems/socket-loose): A loose plug socket has a moving faceplate or worn contacts, and we replace it after the circuit is tested.
- [Sparks when turning on a socket](https://lightingelectrical.co.uk/problems/plug-sparks-when-turned-on): A spark as the socket switch closes means a worn socket contact or a damaged plug.
- [USB socket stopped charging](https://lightingelectrical.co.uk/problems/usb-socket-not-working): A failed charger inside the plate stops the USB ports while the plug outlets on that plate stay live.
- [Yellowed or discoloured socket face plate](https://lightingelectrical.co.uk/problems/socket-face-plate-discoloured): Even yellowing across a cool face plate is aged plastic. Brown marks around the pin holes mean the socket is heating and should be replaced.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)

Updated 2026-11-16.

[Socket installation](https://lightingelectrical.co.uk/services/sockets-and-switches)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
