---
title: "Downstairs circuit keeps tripping | 4.7 Star · NAPIT · From £60"
description: "Downstairs electrics tripping in Peterborough is traced by Lighting Electrical to the socket, light, cable or appliance that opens the breaker."
canonical: "https://lightingelectrical.co.uk/problems/downstairs-circuit-keeps-tripping"
---

# Downstairs circuit keeps tripping

> Downstairs electrics tripping in Peterborough is traced by Lighting Electrical to the socket, light, cable or appliance that opens the breaker.

A downstairs circuit keeps tripping when its breaker or RCD opens on a fault on that floor. Lighting Electrical names the failed socket, light, cable or appliance, and the repair in Peterborough starts once you accept it.

## Why does a downstairs circuit keep tripping?

A downstairs circuit keeps tripping because the safety switch for that floor has opened. A breaker opens on too much current. An RCD, the switch that opens when current leaks to earth, opens on a leak. The fault sits in a socket, a light, a cable or an appliance downstairs.
- **Too much load on the downstairs sockets:** Heaters, a kettle and a tumble dryer together can draw more current than the downstairs breaker allows. The breaker opens to protect the cable from overheating. It holds again after the extra appliances are unplugged, when no other fault is present.
- **An appliance leaking current to earth:** A fridge, a washing machine or a heater with worn insulation leaks a small current to earth. Earth is the safety path that carries fault current away from people. The RCD sees the leak and switches that downstairs circuit off.
- **Damp in a low socket or an outside point:** Sockets near the floor, in a porch or on an outside wall take in rain and condensation. Water across the contacts lets current leak to earth. The RCD opens. Circuits on another switch stay on.
- **A loose joint that is arcing:** A loose terminal in a downstairs socket or light switch sparks under load. That spark is arcing, and it chars the joint until the breaker or RCD opens. A warm face or brown marks around the pins show it without taking the face off.
- **A short in the downstairs cable:** A trapped cable, a nail or a failed joint in a ceiling rose can let live touch neutral or earth. That contact is a short. The breaker opens at once. It will not hold while the short remains.
- **One RCD covering the whole downstairs floor:** On many fuse boards one RCD protects both the downstairs sockets and the downstairs lights. A leak on either circuit opens that RCD and the floor goes dark. An RCBO protects a single circuit because it is a breaker and an RCD in one device. Only that circuit opens.

## What can I check safely when the downstairs circuit trips?

You can read the fuse board through the closed cover, unplug portable appliances and see which downstairs points have died. Every cover stays screwed on. An appliance stays shut and every cable stays untouched.
- **The switch that has opened:** Look at the fuse board with the cover shut. A breaker is the small switch for one circuit. If the downstairs socket switch or the downstairs light switch sits down, that is the circuit that opened. One reset is reasonable when the board is cool, quiet and free of a burning smell.
- **Portable plugs downstairs:** Pull the plugs on heaters, the kettle, the toaster and any extension lead downstairs. Leave a fitted oven or a fixed alarm connected. Reset the open switch once. If it stays up, plug each item back until one of them opens it again.
- **Lights against sockets:** Switch the downstairs lights on and try a lamp you already trust in a downstairs socket. Dead sockets with working lights mean the socket circuit opened. Dead lights with live sockets mean the lighting circuit opened. Both dead means the RCD that covers them has opened.
- **Heat, noise, smell or water:** A warm socket, a buzz or a smell of burning means stop and leave that switch off. Do the same if the fuse board itself smells hot. If a downstairs socket or an outside socket is wet, do not touch it and do not reset the switch.

## When should I book for a downstairs circuit that keeps tripping?

Book Now when a single reset will not hold, or when a socket, a switch or the fuse board is hot, noisy or smelling of burning. A single blown lamp in a cool fitting is ordinary lamp maintenance.
- **It will not hold after one reset:** Portable appliances are unplugged and the breaker or RCD still opens at once. The fault is in the fixed wiring, a socket, a light or a fitted appliance. Leave the switch off, because another reset heats the terminals.
- **Heat, a buzz or a burning smell:** Heat, a buzz or a burning smell at a downstairs socket, a light switch or the fuse board means a joint is failing. Use the switch handle on the front of the board to turn that circuit off. Keep your hands off the screws.
- **The whole downstairs floor is off:** Sockets and lights downstairs die together while other floors stay on. One RCD is opening for more than one circuit, or the main switch has dropped. The board needs a test before anyone resets it again.
- **Water at a low or outside socket:** A leak, a flood or rain at a low socket or an outside socket lets current leak to earth. Leave the switch off. Wipe only the outside of a face that is already dead, and keep your hands away from the pins.

## What happens on a visit for a tripping downstairs circuit?

We test the downstairs circuit from the fuse board and name the failed part before anything is changed. Healthy circuits stay on. Any repair waits until you accept it.
- **What died and which switch opened:** We ask which downstairs points died, when the trip started and which appliances were running. We look at the fuse board with you and note the switch that opened. No screw comes out until a tester shows that circuit is dead.
- **Measurements on the dead circuit:** We isolate the downstairs circuit at its switch. Tests on the dead cable show whether the copper is continuous and whether the insulation is leaking. The readings separate an appliance, a joint, a length of cable and the protective device.
- **The named fault and the repair:** We tell you the failed part before we change it. A sound socket or a sound breaker stays where it is. After you accept the repair we put that part right, test again, and switch the circuit on only if it is safe to leave live.
- **Paperwork, earthing and any next price:** A minor works certificate follows when the finished repair alters the circuit. Our NAPIT registration is on that certificate. Before any further price we check earthing, bonding and whether the supply can carry the downstairs load. Bonding is the link between metal pipes and the fuse board.

## What does tracing a tripping downstairs circuit cost?

Fault finding and repair is charged by the hour. The price covers the tests on the tripping downstairs circuit, the diagnosis we talk through, and the start of the repair after you accept it. A fault at the first socket takes less time than a leak along the downstairs cable. A replacement part, a minor works certificate, fuse board replacement or emergency electrician work changes the price.
- Fault finding & repair: from £75 an hour
- A socket, light, breaker or length of cable is fitted only after the tests show it has failed.
- Fuse board replacement is a separate written price when the RCD or the board itself has failed.
- Emergency electrician work carries its own price, apart from the hourly fault finding.

## Questions about a downstairs circuit that keeps tripping

### Can I keep resetting the downstairs breaker?

One reset is reasonable after you unplug portable appliances, and only while the fuse board is cool and quiet. If the switch opens again, leave it off. Repeated resets heat the cable and the device.

### Will upstairs stay on while you test?

Yes. We switch off the downstairs circuit that is tripping and leave every healthy circuit on. Upstairs stays lit when its own breaker has not opened.

### Will a new fuse board stop the tripping?

Only when the tests show the breaker, the RCD or the board itself has failed. A damaged socket or a leaking appliance still trips a new board. Fuse board replacement is priced on its own after those tests.

### Do I get paperwork after the repair?

A repair that alters the circuit comes with a minor works certificate. The certificate lists the test results and carries our NAPIT registration. An EICR is a wider inspection of the whole installation, booked as its own job.

### Will you swap the breaker before you know why it trips?

No. Testing comes first, and we name the socket, joint, cable, appliance or device that is opening the switch. Nothing is changed until you accept that repair. A sound breaker remains in the fuse board.

## Related problems
- [Automatic gate not opening](https://lightingelectrical.co.uk/problems/electric-gate-not-working): A gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
- [Buzzing sound in the wall](https://lightingelectrical.co.uk/problems/buzzing-in-walls): A buzz inside a wall is a loose joint, a dimmer or a damaged cable on that circuit.
- [Circuit breaker keeps tripping](https://lightingelectrical.co.uk/problems/circuit-breaker-keeps-tripping): The breaker keeps tripping because a fault is still on the circuit, in an appliance, a cable, a joint or the protective device.
- [Consumer unit tripping with nothing plugged in](https://lightingelectrical.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): The consumer unit trips with nothing plugged in because fixed wiring or the safety switch is sending current to earth.
- [Driveway lights not working](https://lightingelectrical.co.uk/problems/driveway-light-not-working): Driveway lights go dark when the outdoor circuit, a sensor or a lantern fails, while rooms on another breaker stay lit.
- [Electric boiler trips the electrics](https://lightingelectrical.co.uk/problems/electric-boiler-tripping-electrics): An electric boiler trips the electrics when its circuit leaks to earth or draws more current than its breaker allows.

## Sources
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-16.

[Electrical fault finding](https://lightingelectrical.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
