---
title: "Humming noise at night from the electrics | 4.7 Star · NAPIT"
description: "Electrical humming at night in Peterborough is traced by Lighting Electrical to a transformer, dimmer or loose terminal on the circuit. · Prices from £60"
canonical: "https://lightingelectrical.co.uk/problems/electrical-humming-at-night"
---

# Humming noise at night from the electrics

> Electrical humming at night in Peterborough is traced by Lighting Electrical to a transformer, dimmer or loose terminal on the circuit. · Prices from £60

A humming noise at night means a transformer, a dimmer or a loose terminal is buzzing once the house goes quiet. Lighting Electrical tests the humming circuit in Peterborough and names the part.

## Why do the electrics hum at night?

The electrics hum at night when a transformer, a dimmer or a loose terminal vibrates in a quiet house. A motor or an inverter can hum the same way while it runs.
- **A dimmer with the wrong lamp:** A dimmer is a switch that lowers lamp brightness. Varilight and other dimmers buzz when the lamp type does not match the dimmer. The quiet night makes that buzz obvious. A warm plate stays switched off.
- **A transformer in a light or a bell:** A transformer changes mains voltage to a lower voltage for a doorbell, some downlights or an alarm panel. The metal core vibrates with the mains and hums the whole time. The hum shows up at night because the rest of the house is quiet.
- **A loose terminal that vibrates:** A terminal is the screw that clamps a cable in a switch, a socket or a light. A loose wire vibrates as current passes and the joint buzzes. The buzz grows when more lights or a heater are on. Arcing, a small spark across that loose joint, then heats the cable.
- **A breaker or RCD on the fuse board:** A breaker is the switch on the fuse board that guards one circuit. An RCD is a switch that opens when current leaks to earth, the safety path back to the board. A tired coil in either device hums through the closed cover.
- **A motor or inverter running at night:** A fridge, a freezer or a boiler pump hums in short spells. An inverter turns direct current from solar panels or a battery into mains power and can hum while it runs. An EV charger can hum while it charges. The machine that goes quiet when switched off is the one we test with its circuit.

## What can I check safely when the electrics hum?

You can place the hum, unplug portable appliances and switch dimmers off. Every cover stays on. The appliance stays shut and the cables stay untouched.
- **Where the hum is loudest:** Walk between the fuse board, the dimmers and the fridge. Note whether the hum cuts in and out with the fridge motor. A steady hum from a dimmer or from the fuse board is a different fault from that motor.
- **Appliances unplugged one by one:** Pull the fridge plug, then the freezer plug. Switch an EV charger off at the isolator beside it. An isolator is the switch that cuts power to that one piece of equipment. The appliance stays shut. A hum that stops shows which machine to bring into the test when you Book Now.
- **Dimmers turned fully off:** Turn each dimmer to off, one at a time. A buzz that ends at one dimmer points to that dimmer or its lamp. A warm dimmer stays off. The plate screws stay in.
- **Listen with the fuse board shut:** Listen at the fuse board with the cover shut. A hum from inside the board, a warm front or a burning smell means you use the breaker handle on the front to switch that circuit off. The cover screws stay in.

## When should I book for a humming noise at night?

Book Now for a hum that continues with appliances off, a humming dimmer or fuse board, heat or a burning smell, or a fridge that goes quiet when unplugged.
- **The hum continues with plugs out:** The fridge, the freezer and the other portable plugs are out, the dimmers are off, and the hum remains. A transformer, a cable joint or a protective device is humming. The breaker handle for that circuit stays off when you can tell which one it is.
- **Heat, a smell or a flicker:** A warm switch, a burning smell or lamps that flicker with the buzz means a joint is arcing. The breaker handle switches that circuit off. The socket and the fuse board stay shut.
- **A fridge that goes quiet when unplugged:** A cool fuse board and a fridge that goes quiet when unplugged is a fault finding visit. We test the socket and the circuit that fed the fridge. The fridge stays unplugged when its motor is humming.
- **The fuse board or a dimmer hums:** A hum from the closed fuse board, or a dimmer that buzzes as soon as it is raised, needs a test of that device and its circuit. Book Now and leave the noisy circuit switched off at the handle.

## What happens on a visit for a night time hum?

We locate the hum, test that circuit and name the part before anything is changed. The repair starts when you say yes to it.
- **Where you hear the hum:** We ask which room is loudest, which appliances were running, and whether a fridge plug or a dimmer changed the hum. We listen at the fuse board with you. A cover comes off only after the circuit is proved dead.
- **Tests on the humming circuit:** We switch off the circuit that hums. Meters show whether the cable is loose, leaking or continuous. The readings separate a dimmer, a transformer, a terminal, a breaker and an appliance lead.
- **The part we name before a repair:** We name the failed dimmer, transformer, terminal, breaker or appliance before a part is fitted. A part that tests sound stays where it is. When a part has failed we fit from the ranges we use, including Varilight, Hager, Wylex, Contactum, BG Electrical and MK Electric.
- **Repair, certificate and the next price:** The repair starts when you say yes. We test the finished circuit. A minor works certificate records a circuit we changed, with our NAPIT registration on it. Before a further price we check the earth path, the bonds on metal pipes and spare capacity on the supply.

## What does tracing a night time hum cost?

Electrical Fault Finding & Repair is charged by the hour. The price covers the tests, the diagnosis we tell you, and the start of the repair when you say yes to it. Finding a hum in one dimmer takes less time than finding a loose terminal along a lighting circuit. A part, a certificate or a new fuse board changes the price. Emergency electrician attendance is a separate charge.
- Fault finding & repair: from £75 an hour
- A dimmer, a breaker or a length of cable is added only after the tests name that part.
- A new fuse board is quoted on its own when the humming device sits in that board.
- Emergency electrician attendance is charged separately from Electrical Fault Finding & Repair.

## Questions about a humming noise at night

### Is a humming fridge an electrical fault?

The hum from a fridge stops when the plug is pulled, and that motor is what you heard. We test the socket on that circuit and the fuse board. We repair the socket or the cable when the tests show a fault there, and the fridge stays unplugged when the motor is humming and the wiring tests sound.

### Will you change the dimmer before you test?

We test the dimmer, the lamp and the lighting circuit before any plate comes off the wall. A new dimmer goes on only when those tests show the old one has failed and you have said yes. A dimmer that tests sound stays in place.

### Can you trace a hum that only happens at night?

Yes. We use what you heard, which switch changed it, and tests on that circuit. A dimmer, a fridge motor or a charger that cycles still leaves a part we can test on the visit. We name that part and repair it when you say yes.

### What paperwork follows a repair for this hum?

A minor works certificate follows a repair that changes the circuit. The certificate lists the tests for that job and our NAPIT registration. An Electrical Installation Condition Report is a separate look at the whole installation and is booked as an EICR.

## Related problems
- [Automatic gate not opening](https://lightingelectrical.co.uk/problems/electric-gate-not-working): A gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
- [Buzzing sound in the wall](https://lightingelectrical.co.uk/problems/buzzing-in-walls): A buzz inside a wall is a loose joint, a dimmer or a damaged cable on that circuit.
- [Circuit breaker keeps tripping](https://lightingelectrical.co.uk/problems/circuit-breaker-keeps-tripping): The breaker keeps tripping because a fault is still on the circuit, in an appliance, a cable, a joint or the protective device.
- [Consumer unit tripping with nothing plugged in](https://lightingelectrical.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): The consumer unit trips with nothing plugged in because fixed wiring or the safety switch is sending current to earth.
- [Downstairs circuit keeps tripping](https://lightingelectrical.co.uk/problems/downstairs-circuit-keeps-tripping): The downstairs breaker or RCD opens because a socket, light, cable or appliance on that floor is leaking or overloaded.
- [Driveway lights not working](https://lightingelectrical.co.uk/problems/driveway-light-not-working): Driveway lights go dark when the outdoor circuit, a sensor or a lantern fails, while rooms on another breaker stay lit.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-16.

[Electrical fault finding](https://lightingelectrical.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
