---
title: "Lights flickering after a new fitting | 4.7 Star · NAPIT · From £60"
description: "Lights flickering after a new fitting in Peterborough: Lighting Electrical tests the lamp, the dimmer and the connection on that lighting circuit."
canonical: "https://lightingelectrical.co.uk/problems/lights-flickering-after-new-fitting"
---

# Lights flickering after a new fitting

> Lights flickering after a new fitting in Peterborough: Lighting Electrical tests the lamp, the dimmer and the connection on that lighting circuit.

A new light flickers when the lamp, the dimmer or a loose connection does not match the circuit. Lighting Electrical in Peterborough tests that fitting and its switch.

## Why do lights flicker after a new fitting?

Lights flicker after a new fitting when the lamp, the dimmer or a joint in that fitting does not suit the circuit.
- **An old dimmer with a new LED lamp:** A dimmer is a switch that reduces brightness. Many older dimmers expect a heavier lamp than an LED draws. The lamp flickers even with the dimmer turned fully up. A dimmer built for LEDs holds the light steady.
- **A loose joint in the new fitting:** The live, neutral and earth meet in the ceiling rose or in the base of the fitting. Live brings the supply in. Neutral takes it back. Earth is the safety path for fault current. A terminal left loose sparks as the fitting warms, and the light flickers.
- **A driver that is not dimmable:** The driver is the small unit inside an LED fitting that feeds the lamp. A non dimmable driver on a dimmer switch flickers. A dimmable driver on a plain on off switch stays steady. We match the driver to the switch already on that circuit.
- **Two switches controlling one light:** Two way switching uses two switches for one light, such as the landing and the hall. The strapper wires link those switches. A new fitting flickers when a strapper sits on the wrong terminal. The other lights on that switch flicker with it.
- **A lamp sitting loose in the holder:** A bayonet or screw lamp that is not fully home loses contact as it warms. Only that fitting flickers. The other lights on the same switch stay steady. A worn holder does the same where the lamp pins meet the contacts.

## What can I check while the fitting stays closed?

You can see which lights flicker, turn a dimmer fully up, and feel for heat at the switch. The fitting, the ceiling rose and the fuse board cover stay shut.
- **One light or the whole room:** Switch the new fitting on and watch the room. Flicker in that fitting alone sits in the lamp, the driver or its joints. Flicker in every light on that switch sits in the switch or the cable they share.
- **The dimmer at full brightness:** Turn the dimmer to its highest setting and leave it there. Flicker that stops at full brightness comes from the dimmer and the lamp together. Flicker that carries on at full brightness comes from a joint or the driver.
- **A bulb you can change by hand:** Seat a loose bulb firmly, or fit a bulb you already know is steady, when the lamp unscrews or unclips. You leave the body of the fitting shut. A sealed LED panel has no bulb to change.
- **Heat, a buzz or a burning smell:** Hold the back of your hand near the switch and the base of the fitting. Warm plastic, a buzz or a burning smell means a joint is arcing. Arcing is a spark across a loose terminal. Switch that light off at the wall.

## When should I book for a flickering new light?

Book Now when the new light is hot, smells of burning, trips the breaker, or flickers with the other lights on that switch.
- **The switch or the fitting is warm:** Heat, a buzz or a burning smell at the new fitting or its switch means a joint is failing. Leave that wall switch off. More use chars the cable in the ceiling.
- **Every light on the switch flickers:** One poor lamp flickers on its own. The whole room flickering together means the switch, the dimmer or a joint they share is failing. That circuit needs a test with the power off.
- **The breaker opens as the light comes on:** The lighting breaker is the guard switch for that circuit in the fuse board. It opens when the new fitting shorts the circuit. Leave the breaker off.
- **The flicker began with the new fitting:** The previous light was steady and the new one flickers from the first time it is switched on. The mismatch is in that fitting, its driver or the dimmer now feeding it. Other circuits in the house stay in use.

## What happens on a visit for a flickering new light?

We isolate the lighting circuit, test the new fitting and its switch, then repair the part those tests name.
- **Which fitting flickers and which switch feeds it:** We ask when the fitting went up, whether a dimmer is in use, and which other lights flicker with it. We read the lighting breaker through the closed fuse board cover. The cover stays on until a tester shows that circuit is dead.
- **Tests at the fitting and the dimmer:** We isolate the lighting circuit at the fuse board. We open the new fitting and the switch that feeds it. We test the live, neutral and earth terminals, and we check that the dimmer suits the lamp. Varilight, MK Electric and BG Electrical are the dimmer ranges we fit.
- **The joint, the dimmer or the driver:** We remake a loose terminal. We change a dimmer that cannot run the lamp for one that can. We replace a failed driver when the fitting takes a separate driver. A sound fitting stays on the ceiling.
- **The circuit back on and the certificate:** We switch the lighting circuit back on and run each light on that switch. A minor works certificate records any change to the circuit and names our NAPIT registration. We check earthing and bonding before we price any further work. Earthing is the fault path. Bonding links metal pipes to the fuse board.

## What does a flickering new light cost?

The price covers testing the new fitting, its switch and the lighting circuit, and repairing the part those tests name. A replacement dimmer, a driver, a length of cable or a minor works certificate changes the price. Lighting Installation is a separate price when you want a full set of new lights.
- Downlight installation (per fitting): from £65
- A Varilight, MK Electric or BG Electrical dimmer is added only when the fitted dimmer cannot run the lamp.
- A minor works certificate is part of the price when the repair changes the circuit.
- Fuse board replacement is priced as its own job when the lighting breaker has failed.

## Questions about a new light that flickers

### Will the new fitting have to come down?

We test the lamp, the dimmer and the terminals before we disturb the fitting. The fitting stays up when the lamp, the dimmer or one terminal is at fault. We change it when the driver is sealed inside and has failed.

### Which dimmer do you fit for an LED lamp?

We fit a dimmer matched to the lamp, from Varilight, MK Electric or BG Electrical. It takes the place of the dimmer on that switch. We test the lighting circuit again after it is connected.

### What paperwork do I get after the light is repaired?

A minor works certificate records a change to the dimmer, the joint or the cable. It names our NAPIT registration and the tests for that job. If nothing on the circuit changes, we leave you the readings and the part that failed.

### Can the rest of the house stay on?

We switch off the lighting circuit that feeds the flickering fitting. Socket circuits and any other lighting circuit stay on. We put that lighting circuit back on after the repair.

### I fitted this light myself. Will you still take the job?

Yes. We test the fitting you put up and the switch that feeds it. We land a loose neutral or a swapped strapper on the correct terminal. A minor works certificate covers that correction when the circuit is altered.

## Related problems
- [Dimmer switch lights flicker](https://lightingelectrical.co.uk/problems/dimmer-lights-flickering): Flicker on a dimmer comes from lamps that do not suit the dimmer, or from a loose joint on the lighting circuit.
- [Dimmer switch not working](https://lightingelectrical.co.uk/problems/dimmer-switch-not-working): A dimmer stops working when its module fails, the lamps cannot dim, or the lighting circuit opens.
- [Pull cord light switch not working](https://lightingelectrical.co.uk/problems/pull-cord-not-working): A dead pull cord is a worn ceiling switch, a failed lamp, or an open lighting circuit.
- [Why is my ceiling light buzzing](https://lightingelectrical.co.uk/problems/light-fitting-buzzing): A buzzing ceiling light is a loose joint, a failing lamp or a dimmer that does not suit the lamp.
- [Why is my dimmer switch humming?](https://lightingelectrical.co.uk/problems/dimmer-switch-buzzing): Hum comes from lamps that do not suit the dimmer, or from a loose joint in the switch.
- [Wires hanging from the ceiling](https://lightingelectrical.co.uk/problems/wires-hanging-from-ceiling): Hanging ceiling wires are cable ends left outside a rose, and the lighting circuit is isolated before they are refitted.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [IET: BS 7671 Guidance Publications](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/bs-7671-and-guidance/)

Updated 2026-11-16.

[Lighting installation](https://lightingelectrical.co.uk/services/lighting-installation)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
