---
title: "Sparks when turning on a socket | 4.7 Star · NAPIT approved · From £60"
description: "Plug sparks when a socket is switched on in Peterborough get a test from Lighting Electrical. We name the failed socket or plug before any part is changed."
canonical: "https://lightingelectrical.co.uk/problems/plug-sparks-when-turned-on"
---

# Sparks when turning on a socket

> Plug sparks when a socket is switched on in Peterborough get a test from Lighting Electrical. We name the failed socket or plug before any part is changed.

A plug that sparks as the socket switch closes has a worn contact or a damaged plug. In Peterborough, Lighting Electrical tests the sparking socket and fits a new socket only when the contact has failed.

## Why does a plug spark when the socket is switched on?

The spark comes from a worn switch contact, a loose terminal or a damaged plug at that one socket. Power can still be present on other sockets.
- **Worn contacts inside the socket switch:** The socket switch opens and closes the live conductor, the wire that carries power to the socket. Each use wears the metal faces. A gap lets current jump as a spark, which is called arcing. Arcing heats the plastic and leaves brown marks around the rocker.
- **A loose terminal behind the faceplate:** The faceplate is the plastic front of the socket. A loose screw on the live terminal lets the wire move. The joint sparks when the switch puts the socket under load. You leave those screws in place.
- **A plug with bent or burnt pins:** Pins that are bent, black or loose in the holes make a poor grip. Current jumps that gap as the socket switch closes. The plug body can crack from the heat. A burnt plug stays out of every socket.
- **Too much load on one socket:** A heater, a kettle and a multiway adaptor on one double socket heat the contacts. Hot contacts arc when the switch closes. The adaptor is the extra block of sockets on one plug. That heat stays in this socket.
- **A cracked or scorched faceplate:** A crack lets the switch rocker sit out of line with the contacts. The switch then arcs each time it closes. Brown stains around the pin holes show the same heat. The socket stays switched off.

## What can I check safely before the socket is opened?

You can look at the outside of the socket and the plug. You leave the switch off. You do not remove a screw or open the cables.
- **The rocker and any burning smell:** Switch the socket off at the rocker on the front if the plastic is cool. Leave it off if the face is hot, buzzing or smelling of burning. You do not switch it on again to watch the spark.
- **Brown marks and the plug pins:** Look at the pin holes and the plug pins in daylight. Black pins, a cracked plug or brown stains on the faceplate mean that part has been hot. The faceplate stays screwed on.
- **Which plugs sparked in that socket:** Recall which plug was in the socket when it sparked. A spark with only one appliance points to that plug. A spark with several different plugs points to the socket switch. You leave those plugs out.
- **A lamp in another socket:** Plug a lamp you already trust into a different socket in the same room. A lit lamp there means the spark is at one point. The fuse board is the box of switches that protect each circuit. Read it through the closed cover.

## When should I book for a plug that sparks?

Book Now if the socket cracked, smoked, smelled of burning, or sparked more than a single small flash. A socket that is hot stays switched off until it is tested.
- **A crack, smoke or brown marks:** A loud crack, smoke or brown marks mean the contacts are arcing under load. Keep the rocker off. Book Now so the socket can be tested before anyone uses it again.
- **Any plug sparks in the same socket:** Several plugs have sparked in one socket, so the fault sits in the switch or the terminals. Stop using that socket. Cool quiet sockets elsewhere in the house can stay in use.
- **A hot plug or a buzzing rocker:** Heat in the plug or a buzz from the rocker means a joint is loose. Pull the plug out by the plug body if the plastic is cool enough to hold. Leave the rocker off.

## What happens on a visit for a sparking socket?

We isolate the circuit, test the socket and the plug, and name the failed part before anything is replaced. A repair starts only after you say yes to it.
- **Which socket sparked and which circuit is off:** We ask which socket sparked, which appliance was plugged in, and whether you saw heat or brown marks. We switch off that circuit at the fuse board. A tester confirms the socket is dead before any screw comes out.
- **Tests on the switch, the terminals and the plug:** We test the switch contacts, the terminals and the cable to that socket. The same tests show a damaged plug. We tell you whether the socket, the plug or the cable has failed before a part is changed.
- **Earthing, bonding and the load:** Earthing is the path that carries fault current away from you. Bonding is the link between metal pipes and that earth. We check both, and we check that the circuit can carry the load, before any further price is written.
- **A new socket and the certificate:** We fit a replacement socket when you have said yes and the tests show the socket has failed. We test the circuit again after the fitting. Where the circuit is altered we leave a minor works certificate showing our NAPIT registration.

## What does a sparking socket repair cost?

The price covers the tests on the sparking socket, the finding we talk through with you, and the replacement socket when you have said yes to that repair. A second point, new cable, or plaster and paint after the wall is cut changes the price. Emergency electrician attendance is priced as its own job.
- Socket installation or replacement: from £85
- A socket from MK Electric, BG Electrical or Contactum is fitted only when the tests show that socket has failed.
- Plaster and paint after a channel is cut for cable are written on their own lines.
- Fuse board replacement is a separate job when the tests show the board itself has failed.

## Questions about a plug that sparks

### Is a small spark normal when I switch a socket on?

A single tiny flash as a large appliance starts can come from the load and does not crack or repeat. A spark from the rocker, a smell, or brown marks means the contact is failing. Leave that socket off and Book Now.

### Should I keep using the socket if it sparked only once?

No. One spark with heat, a smell or a mark is enough to stop using that socket. Switch it off at the rocker and unplug by the plug body if the plastic is cool. We test it before it is used again.

### Will the rest of my house stay on while you test?

Yes. Only the circuit feeding the sparking socket is switched off. Every other circuit stays on, and we restore the socket circuit only when the tests show it can be live.

### Do I get a certificate after the socket is replaced?

Yes. Where we replace the socket we issue a minor works certificate with the test results and our NAPIT registration. A visit that changes nothing still ends with the readings and the named fault written down for you.

### What if the plug is at fault and the socket is sound?

We tell you the plug is the failed part before we take the socket off for a replacement. A sound socket stays on the wall. We leave the test readings with you so the damaged plug can be taken out of use.

## Related problems
- [Cracked plug socket](https://lightingelectrical.co.uk/problems/socket-cracked): A cracked plug socket stays unused until the face is replaced and the terminals behind it are tested.
- [Extension lead getting hot](https://lightingelectrical.co.uk/problems/overheating-extension-lead): A hot extension lead is overloaded, so the appliance needs a fixed socket instead of that lead.
- [Loose or wobbly plug socket](https://lightingelectrical.co.uk/problems/socket-loose): A loose plug socket has a moving faceplate or worn contacts, and we replace it after the circuit is tested.
- [One side of a double socket not working](https://lightingelectrical.co.uk/problems/double-socket-one-side-not-working): One outlet on a double socket goes dead when its contacts or switch fail and the other outlet still has power.
- [USB socket stopped charging](https://lightingelectrical.co.uk/problems/usb-socket-not-working): A failed charger inside the plate stops the USB ports while the plug outlets on that plate stay live.
- [Yellowed or discoloured socket face plate](https://lightingelectrical.co.uk/problems/socket-face-plate-discoloured): Even yellowing across a cool face plate is aged plastic. Brown marks around the pin holes mean the socket is heating and should be replaced.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [HSE: Electrical Safety at Work](https://www.hse.gov.uk/electricity/)

Updated 2026-11-16.

[Socket installation](https://lightingelectrical.co.uk/services/sockets-and-switches)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
