---
title: "Someone got an electric shock: what to do | 4.7 Star · NAPIT"
description: "Electric shock in Peterborough: get the person clear of the live part and get medical help. Lighting Electrical then isolates and tests the circuit."
canonical: "https://lightingelectrical.co.uk/problems/someone-got-an-electric-shock"
---

# Someone got an electric shock: what to do

> Electric shock in Peterborough: get the person clear of the live part and get medical help. Lighting Electrical then isolates and tests the circuit.

Switch off the supply without touching the person, then get medical help. Lighting Electrical in Peterborough isolates the circuit that gave the shock and tests it before that circuit is used again.

## Why does someone get an electric shock at home?

A shock happens when live voltage reaches a person through a failed earth, water, a loose live wire, or a protective device that did not open. The fitting stays unsafe until that circuit is switched off and tested.
- **A broken earth on a socket or appliance:** The earth is the safety wire that should carry fault current away and open the protective device. A loose earth in a socket, or a broken earth in a flex, lets the metal case rise to live voltage. Anyone who touches that case receives a shock.
- **Water in a light, socket or outdoor fitting:** Water across the live contacts gives current a path out of the fitting. Wet skin makes the shock more severe. The fitting stays dangerous until its breaker is switched off.
- **No RCD, or an RCD that did not open:** An RCD is a switch that opens when current leaks away from the circuit. A fuse board with no RCD leaves that leak free to pass through a person. An RCD that has failed stays closed when it should have switched off.
- **A live wire touching metal or a screw:** A conductor is the copper wire inside a cable. When the live conductor slips out of a terminal and touches a metal box or a faceplate screw, that metal becomes live. The shock is felt on the screw or the plate.
- **Bonding missing from metal pipes:** Bonding is the link that ties metal pipes and baths to the earth at the fuse board. Without that link a fault elsewhere can put a voltage on a tap. Touching the tap then gives a shock.

## What can you check safely after an electric shock?

You can switch off at the plug or the fuse board, note the point they touched, and look for a burn or scorch marks. Every cover stays on, and you do not touch the person while they are still against the live part.
- **Whether the person is still on the live part:** If the person is still holding an appliance or leaning on a fitting, keep your hands off them. Switch off at the wall plug or the breaker only when your hand will not touch the person. Note that they are clear before you go near the fitting.
- **The breaker for that room, cover left on:** Once the person is clear, switch off the breaker for the room they were in. Read the labels through the closed fuse board cover. Leave a breaker that opened during the shock in the off position.
- **The socket, light or shower they touched:** Note the exact point they touched. Unplug a portable appliance by the plug itself, then leave that appliance unplugged. Do not open the plug, the shower or the light.
- **Burns, smell and heat seen from outside:** Look for a small burn on the skin and for brown marks or melted plastic on the fitting. A burning smell means the circuit stays off. Keep your fingers away from screws and from the inside of the board.

## When should you book after an electric shock?

Book Now once the person is clear of the live part and that circuit is off, even if they feel well. A shock from a socket, a light, a shower or a metal tap needs a test before anyone uses the circuit again.
- **A shock from a fitting, even if they feel well:** Current has already passed through the person. Feeling better does not show that the earth, the cable or the RCD is sound. The circuit stays off until it is tested.
- **A tingle from a tap or a metal case:** A tingle means metalwork is carrying a voltage it should not carry. That points to the earth or the bonding. Leave the nearby circuit off and keep hands off that metal.
- **An RCD or breaker that stayed up:** The protective device should have opened during the shock and it did not. Using the circuit again repeats the shock. Book Now so the device and the circuit it guards can be tested.

## What happens on a visit after an electric shock?

We switch off the circuit that gave the shock, test it dead, and name the failed part before any repair. Circuits that were not involved stay on when the fuse board can separate them.
- **The point they touched, then the circuit off:** We ask which socket, light, shower or metal part they touched, and when it happened. We switch that circuit off at the fuse board and confirm it is dead with a tester. Circuits that did not shock anyone remain on when the board can separate them.
- **Tests on the earth, the cable and the RCD:** We test whether the earth still connects, whether the insulation is leaking, and whether the RCD opens as it should. The readings separate a broken earth, a wet fitting, a loose live wire and a failed RCD.
- **The failed part named before a price for more work:** We tell you the failed socket, cable, fitting or device before anything is replaced. Before a further price we confirm the earth path, the pipe bonding and that the supply can feed the load already in use.
- **The repair, a retest and the certificate:** You accept the repair before we fit the failed part. We test the circuit again when the work is finished. A change to the circuit is written on a minor works certificate with our NAPIT registration, and an unsafe circuit is left switched off.

## What does an electric shock call out cost?

The emergency electrician price covers our attendance, the tests on the circuit that gave the shock, and leaving that circuit off so the rest of the installation can be used. A fitted part, a minor works certificate, or a later fuse board replacement changes the price. We write that further price before the extra work starts.
- Emergency electrician (out of hours): from £90 an hour
- A longer test, a fitted part or a minor works certificate changes what you pay for the visit.
- Fuse board replacement has its own written price when the tests show the board or the RCD has failed.
- Work that continues after the circuit is safe is priced in writing before that work starts.

## Questions about an electric shock at home

### Should I call 999 as well as booking an electrician?

Yes if the person is unconscious, burnt, in pain, or feels unwell after the shock. An electrical burn can be deep even when the skin mark is small, so they need hospital care. Book Now for the circuit once they are clear of the live part and it is switched off.

### Can I switch the power back on if they feel fine?

No. Leave the breaker for that circuit off. Feeling well does not mean the earth or the RCD is sound. We test the circuit and name the failed part before it is used again.

### Will you fix the cause on the same visit?

We name the failed socket, cable, fitting or protective device on the visit. You accept that repair before we fit the part. A fuse board replacement waits for its own written price.

### What certificate do I get after the repair?

A minor works certificate records a repair that changes the circuit, with the test results and our NAPIT registration. If we only switch the circuit off and fit nothing, we write down the readings and the failed part.

### Does a shock from a shower or an outside light need this visit?

Yes. We switch off the circuit that feeds that shower or light and test the earth, the cable and the RCD. The repair starts after you accept it. That circuit stays off while the fault is still there.

## Related problems
- [Brown marks on a socket or plug](https://lightingelectrical.co.uk/problems/scorch-marks-on-socket): Brown marks on a socket or plug mean the connection has overheated, so that circuit stays off until it is tested.
- [Burning plastic smell from electrics](https://lightingelectrical.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell means the insulation on a live joint is getting hot, so that circuit stays switched off until it is tested.
- [Burning smell from a socket](https://lightingelectrical.co.uk/problems/burning-smell-from-socket): A burning smell from a socket means a connection is overheating and that circuit should stay off until it is tested.
- [Burning smell from the fuse box](https://lightingelectrical.co.uk/problems/burning-smell-from-fuse-box): A burning smell at the fuse box means a connection or device is overheating, so that circuit stays off until it is tested.
- [Electric shock from a light switch](https://lightingelectrical.co.uk/problems/electric-shock-from-light-switch): A shock from a light switch means the switch face is carrying current and that lighting circuit should be isolated.
- [Electric shock from the shower](https://lightingelectrical.co.uk/problems/electric-shock-from-shower): A shock from the shower means current is on the water, the case or the taps, so that circuit stays off until it is tested.

## Sources
- [Electrical Safety First: First aid tips for electric shock](https://www.electricalsafetyfirst.org.uk/safety-advice/home-and-people/house-maintenance/first-aid/)
- [St John Ambulance: Electric shock first aid](https://www.sja.org.uk/first-aid-advice/electrocution/)
- [NHS: Burns and scalds (electrical burns need A&E)](https://www.nhs.uk/conditions/burns-and-scalds/)
- [HSE: Electrical injuries](https://www.hse.gov.uk/electricity/injuries.htm)

Updated 2026-11-16.

[Emergency electrician](https://lightingelectrical.co.uk/services/emergency-electrician)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
