---
title: "Tingling when touching an appliance | 4.7 Star · NAPIT · From £60"
description: "Tingling when touching an appliance in Peterborough means current is on the case. Lighting Electrical tests the earth and the flex and isolates that…"
canonical: "https://lightingelectrical.co.uk/problems/tingling-from-appliance"
---

# Tingling when touching an appliance

> Tingling when touching an appliance in Peterborough means current is on the case. Lighting Electrical tests the earth and the flex and isolates that…

A tingling sensation from an appliance means a small current has reached the metal case. Lighting Electrical in Peterborough tests the socket earth and the flex, then isolates the part that is live to touch.

## Why does an appliance give a tingling sensation?

An appliance tingles because current that should travel in the earth has reached the metal case. The usual causes are a broken earth, a leak inside the appliance, a damaged socket, or water across the metal.
- **A broken earth in the socket or flex:** The earth wire gives fault current a path back to the fuse board so a breaker or RCD can open. If that wire is loose or snapped, the current sits on the case and you feel it as a tingle. The appliance can still run.
- **Current leaking onto the metal case:** Heat, wear or a damp winding lets a little current leave the live conductor and reach the case. A washing machine, tumble dryer, oven or fridge does this more often than a set with a plastic body. The case feels live even when the controls still work.
- **A loose earth in the plug or the socket:** The earth pin in the plug and the earth terminal in the socket must stay tight. A pin that misses the terminal leaves the case with no path for fault current. Other sockets on the same circuit can still feel normal.
- **Water bridging live parts to the case:** A wet floor, a split flex or steam behind a washing machine lets water join live metal to the case. You feel the tingle more with bare feet or a wet hand. The RCD may open, or the leak may stay too small to open it.
- **An RCD that misses a small leak:** An RCD is a switch that opens when current leaks away from the circuit. A tingle can be a leak below the level that opens it. The case still carries enough current to feel. The fuse board can look normal.
- **Voltage on the supply earth:** If the combined neutral and earth conductor in the street supply is loose, metal cases and taps can sit above earth. Several appliances tingle at once, and a metal tap can tingle too. The fuse board leaves that supply fault in place.

## What can I check safely on a tingling appliance?

You can unplug the appliance by the plug, read the switch positions on the closed fuse board, and look along the flex for cuts. Those checks use the plug, the front of the board and the outside of the flex.
- **Unplug it by the plug:** Switch the appliance off at its own switch, then pull the plug out by the plug body. Leave the machine where it stands. If a metal tap still tingles with that plug out, the feeling is on the pipework or the supply earth.
- **Switch positions with the cover on:** Read the switches with the fuse board cover still screwed on. Note any switch sitting down, especially an RCD, the wider switch with a test button. Leave every switch as you find it if the board is warm or smells of burning.
- **The flex and the earth pin:** With the plug out, look along the flex for splits, brown marks or a crushed section. Check that the earth pin, the longer pin, is present and firm. A missing earth pin leaves the case with nowhere for fault current to go.
- **One machine or several:** Recall whether only this appliance tingled, or whether a kettle, the oven and a tap did too. One machine points to its flex, its plug or the workings inside it. Several metal items point to the socket circuit or the supply earth.

## When should I book for a tingling appliance?

Book Now as soon as any metal case, tap or socket tingles, even if the appliance still runs. A tingle is current on something you can touch, so the appliance stays unplugged until it is tested.
- **The case tingles while it runs:** Any tingle or mild shock from a case is enough to Book Now. The appliance can look fine and still put current on the metal. Leave the plug out and keep bare hands off the case.
- **A tap or several appliances tingle:** When more than one appliance tingles, or a metal tap does, the installation earth or the supply earth needs a test. Unplug each appliance you felt it on. Other circuits that have stayed cool and free of any tingle can stay on.
- **The RCD opens when it is plugged in:** If the RCD opens when that appliance is plugged in, leave the appliance unplugged and the RCD up only if it then holds. If the RCD opens with the plug already out, leave the RCD off. Another reset warms the switch.
- **Heat, a smell or a damaged flex:** Brown marks on a plug, a hot socket or a burning smell means a joint is failing as well as leaking. Use the plug and the breaker handle only. Book Now with the appliance unplugged.

## What happens on a visit for a tingling appliance?

We test the appliance flex and the socket earth, then name the failed part before anything is changed. We repair the fixed wiring once you accept the price, or we leave a leaking appliance unplugged.
- **Which appliance and which socket:** We ask which case tingled, which socket it used, and whether a tap did the same. We look at the fuse board with you and note any RCD that has opened. The appliance stays unplugged while we set up the tests.
- **Tests on the flex and the socket:** We test the earth path from the plug pin back to the fuse board. An insulation test shows whether the live conductor leaks to the case or the earth wire. A polarity check confirms live and neutral sit in the right plug terminals. The readings separate a failed flex, a failed socket and a leak in the appliance.
- **The tingling circuit comes off:** We switch off only the circuit that feeds the tingling socket when the readings show the fixed wiring is at fault. Other circuits stay on. The leaking appliance stays unplugged when the leak is inside it, and a sound socket on another circuit stays in use.
- **The repair and the certificate:** When the socket, the earth connection or the connection to the flex has failed, we replace that part once you accept the price. We test the circuit again. A minor works certificate records the change with our NAPIT registration. Before a further price we check earthing, bonding to metal pipes, and whether the supply can carry the load.

## What does a tingling appliance visit cost?

The price covers the visit, tests on the appliance flex and the socket earth, and isolation of the tingling circuit or removal of the plug so the case is off supply. The time those tests take, a replacement socket or earth connection, and a minor works certificate each change the price. Emergency electrician attendance is a separate price from Electrical Fault Finding & Repair when the visit is an emergency call.
- Emergency electrician (out of hours): from £90 an hour
- A test that runs from the plug back to the fuse board takes longer than a test on a single flex.
- A socket or breaker from Hager, Wylex, Contactum, BG Electrical or MK Electric goes in only after the readings show that part has failed.
- A failed RCD or a failed earth bar means fuse board replacement, and that job has its own written price.

## Questions about tingling from an appliance

### Is a small tingle from my appliance dangerous?

Yes. A tingle is current passing through your skin from the case. The same fault can become a full shock on a wet floor or with a firmer grip. Unplug the appliance and Book Now.

### Why does my washing machine tingle and still run?

The motor can run on live and neutral while a small leak sits on the metal case. The earth should carry that leak away and open the RCD. A poor earth leaves the leak on the case, so the drum still turns and the metal tingles.

### Will you fix the appliance or the socket?

We test the flex, the plug and the socket and tell you which one is leaking. We repair the socket, the earth connection or the fixed wiring once you accept the price. An appliance that leaks inside stays unplugged, and we connect a replacement appliance to a socket that has tested sound.

### What paperwork do I get after the repair?

A minor works certificate follows when we alter the circuit, such as a new socket or a remade earth connection. It records the test results and our NAPIT registration. If we only isolate the circuit and change nothing, we tell you the readings and the failed part.

### Can I keep using that socket for other appliances?

Use it again after the test shows the socket earth is sound. Until then, leave the tingling appliance unplugged and leave that socket empty. Other circuits that have stayed cool and free of any tingle can stay on.

## Related problems
- [Brown marks on a socket or plug](https://lightingelectrical.co.uk/problems/scorch-marks-on-socket): Brown marks on a socket or plug mean the connection has overheated, so that circuit stays off until it is tested.
- [Burning plastic smell from electrics](https://lightingelectrical.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell means the insulation on a live joint is getting hot, so that circuit stays switched off until it is tested.
- [Burning smell from a socket](https://lightingelectrical.co.uk/problems/burning-smell-from-socket): A burning smell from a socket means a connection is overheating and that circuit should stay off until it is tested.
- [Burning smell from the fuse box](https://lightingelectrical.co.uk/problems/burning-smell-from-fuse-box): A burning smell at the fuse box means a connection or device is overheating, so that circuit stays off until it is tested.
- [Electric shock from a light switch](https://lightingelectrical.co.uk/problems/electric-shock-from-light-switch): A shock from a light switch means the switch face is carrying current and that lighting circuit should be isolated.
- [Electric shock from the shower](https://lightingelectrical.co.uk/problems/electric-shock-from-shower): A shock from the shower means current is on the water, the case or the taps, so that circuit stays off until it is tested.

## Sources
- [HSE: Electricity, work using electrically powered equipment](https://www.hse.gov.uk/electricity/electricequip.htm)
- [Electrical Safety First: first aid for electric shock](https://www.electricalsafetyfirst.org.uk/safety-advice/home-and-people/house-maintenance/first-aid/)
- [NHS: Electric shock](https://www.nhs.uk/conditions/electric-shock/)

Updated 2026-11-16.

[Emergency electrician](https://lightingelectrical.co.uk/services/emergency-electrician)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
