---
title: "Upstairs circuit keeps tripping | 4.7 Star · NAPIT approved · From £60"
description: "Upstairs electrics tripping in Peterborough are tested by Lighting Electrical at the fuse board and along the upstairs circuit. · 4.7 Star from 61 reviews"
canonical: "https://lightingelectrical.co.uk/problems/upstairs-circuit-keeps-tripping"
---

# Upstairs circuit keeps tripping

> Upstairs electrics tripping in Peterborough are tested by Lighting Electrical at the fuse board and along the upstairs circuit. · 4.7 Star from 61 reviews

An upstairs circuit that keeps tripping opens because of a fault on that circuit. Lighting Electrical tests the upstairs device and the fittings until the failed part is named.

## Why does the upstairs circuit keep tripping?

The upstairs breaker opens because that circuit is leaking current or drawing too much current. Circuits on other floors stay on when they have their own device in the fuse board.
- **Damp on a bathroom light or fan:** A bathroom light or extractor on the upstairs lighting circuit takes in steam. Current then leaks to earth, the safety path that carries a fault away from you. The RCD, a safety switch that opens on a leak, trips that circuit.
- **A loose joint in a ceiling rose:** A ceiling rose is the base a pendant hangs from. Extra lights added at that rose or in a loft box leave a joint that loosens. The joint heats, and the breaker opens. A breaker is the switch in the fuse board that guards one circuit.
- **An appliance in an upstairs socket:** Bedroom sockets are wired on their own breaker, apart from the upstairs lights. A charger, heater or lamp with a damaged lead leaks current or overloads that breaker. The upstairs sockets trip. Sockets on other floors stay on.
- **One RCD over several upstairs circuits:** On a split load fuse board, one RCD feeds the upstairs lights and the upstairs sockets together. A leak on either circuit opens that RCD. Several upstairs circuits go off together. Circuits on the other RCD stay on.
- **A failed RCBO on one upstairs circuit:** An RCBO combines a breaker and an RCD for one circuit only. A fault on the upstairs lights trips the upstairs lighting RCBO and leaves every other circuit on. A worn RCBO opens even when the cable beyond it is sound.

## What can I check safely on a tripping upstairs circuit?

You can check the closed fuse board, the plugs upstairs, and whether the lights or the sockets trip. Every cover stays screwed on, and you do not touch a bare wire.
- **The switch that has dropped:** Look at the switch positions through the closed cover. Note whether the upstairs lights, the upstairs sockets, or a wider RCD sits down. Reset that switch once only if the board is cool, quiet and free of any burning smell.
- **Plugs pulled in the bedrooms:** Unplug chargers, heaters, lamps and extension leads upstairs. Reset the dropped switch once. If it holds, plug the items back one at a time until one of them trips it. Leave that item unplugged.
- **Lights off, then sockets:** Turn the upstairs lights off and reset the switch. A circuit that holds with the lights off points to a fitting on the lighting circuit. A circuit that still trips points to the sockets or the device itself.
- **Heat, noise or a wet fitting:** A warm ceiling rose, a buzz or brown marks around a lamp mean the joint is overheating. Leave that switch off. If a bathroom light or a loft fitting is wet, keep your hands away and leave the circuit off.

## When should I book for an upstairs circuit that trips?

Book Now if one reset fails to hold, or if a fitting or the fuse board is hot, buzzing or smelling of burning.
- **The switch will not hold:** With the upstairs plugs removed, the device opens again at once. The fault is in a fitting, a joint, a cable or the protective device. That circuit stays off, because another reset heats the terminals.
- **Heat, a buzz or a burning smell:** A warm rose, a buzzing lamp or a burning smell at the fuse board means a joint is arcing. Arcing is a spark jumping a loose connection. Turn the circuit off with the switch handle on the front of the board.
- **Lights and sockets dropping together:** Upstairs lights and upstairs sockets go off together while other floors stay on. One RCD is feeding that upstairs group, or the circuits need tests to be separated. Leave those switches off and Book Now.
- **Water on a light or in the loft:** A leak onto a bathroom light or a loft fitting sends current to earth and holds the device open. Do not open the fitting or wipe inside it. Leave the upstairs switch off.

## What happens on a visit for an upstairs trip?

We test the upstairs circuit from the fuse board and name the failed part before we change it. Any repair waits until you accept it.
- **Which upstairs points are tripping:** We ask whether the lights, the sockets or both drop, and when the trip started. We read the open switch beside you. No screw comes off a fitting until a tester shows that circuit is dead.
- **Tests with the upstairs circuit off:** We switch the upstairs circuit off at its device. Continuity testing shows whether the copper still links each point. Insulation testing shows whether current leaks between the wires. The two readings separate a fitting, a joint, a cable and the device.
- **The failed part named first:** You hear which fitting, joint, cable or device failed before anything is changed. A sound fitting stays closed. We check earthing, the return path for fault current, and bonding, the link from metal pipes to that earth. We check the supply can carry the load before we price extra work.
- **The repair and the certificate:** After you accept the repair, we change the failed fitting, joint or device and test the circuit again. A minor works certificate records that upstairs repair and our NAPIT registration. If the circuit is unsafe to put back on, its switch stays off and sound circuits on other floors stay on.

## What does finding an upstairs trip cost?

The time we spend on the upstairs circuit sets the price. That time includes the tests, the diagnosis we speak through with you, and the start of the repair once you accept it. A wet bathroom fitting takes less time than a joint in the loft. A part, a minor works certificate, fuse board replacement or emergency electrician attendance changes the price.
- Fault finding & repair: from £75 an hour
- A fitting, breaker or cable from Hager, Wylex, Contactum, BG Electrical or MK Electric is added only after the tests show it has failed.
- Fuse board replacement carries its own price when the upstairs device or the board has failed.
- Emergency electrician attendance is priced apart from the fault finding hour.

## Questions about an upstairs circuit that keeps tripping

### Will the rest of the house stay on?

Yes. We switch off only the upstairs circuit we are testing. Sound circuits stay on, and the upstairs circuit stays off if it cannot be put back on after the repair.

### Will a new fuse board stop the upstairs trip?

Only when the tests show the upstairs device or the fuse board has failed. A sound board stays in place if a fitting, a joint or a cable is the fault. Any board change has its own price.

### Do you repair the upstairs circuit on the same visit?

We change the failed fitting, joint or device on the visit once you accept the repair. A fuse board replacement waits for a separate price. If the circuit has to stay off, we write down the readings and the failed part.

### What paperwork follows an upstairs repair?

A minor works certificate follows when the repair changes the circuit. It lists the test results and our NAPIT registration. An EICR, the Electrical Installation Condition Report, is a separate inspection of the whole installation.

### Can you trace a trip that comes and goes?

Yes. We test the upstairs circuit at the fuse board and at the fittings even when it is holding during the visit. A trip that comes and goes still leaves a weak insulation reading or a loose joint. We tell you those readings and what still needs watching.

## Related problems
- [Automatic gate not opening](https://lightingelectrical.co.uk/problems/electric-gate-not-working): A gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
- [Buzzing sound in the wall](https://lightingelectrical.co.uk/problems/buzzing-in-walls): A buzz inside a wall is a loose joint, a dimmer or a damaged cable on that circuit.
- [Circuit breaker keeps tripping](https://lightingelectrical.co.uk/problems/circuit-breaker-keeps-tripping): The breaker keeps tripping because a fault is still on the circuit, in an appliance, a cable, a joint or the protective device.
- [Consumer unit tripping with nothing plugged in](https://lightingelectrical.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): The consumer unit trips with nothing plugged in because fixed wiring or the safety switch is sending current to earth.
- [Downstairs circuit keeps tripping](https://lightingelectrical.co.uk/problems/downstairs-circuit-keeps-tripping): The downstairs breaker or RCD opens because a socket, light, cable or appliance on that floor is leaking or overloaded.
- [Driveway lights not working](https://lightingelectrical.co.uk/problems/driveway-light-not-working): Driveway lights go dark when the outdoor circuit, a sensor or a lantern fails, while rooms on another breaker stay lit.

## Sources
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-16.

[Electrical fault finding](https://lightingelectrical.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://lightingelectrical.co.uk/#chat)
