Fire alarm not working
A silent test button means that smoke or heat alarm has failed. Lighting Electrical in Peterborough tests the detector and fits a replacement when you accept it.
Calls answered 24/7
- 10 years trading
Why is my fire alarm not working?
A fire alarm stops working when the detector itself has failed, its power has run out, or dust has blocked the sensor. The horn then stays silent on the test button, or the head keeps chirping.
- The sealed battery has run outAico and FireAngel smoke and heat alarms keep the battery sealed inside the head. When that battery can no longer run the sensor, the alarm chirps and then goes silent. The whole detector is replaced. You do not open the head.
- Dust blocking the sensorDust, steam and small insects settle in the vents of a smoke alarm. The sensor then misses real smoke, or the head chirps as a fault. Paint over those vents stops a heat alarm sensing as well.
- The hush control left onThe hush button on the cover quiets a nuisance beep for a short time. If the head is faulty, the alarm stays quiet and will not sound when you press test. The button is on the outside of the cover.
- One interlinked head has failedInterlinked alarms are meant to sound together. Aico and FireAngel heads link by radio or by a wire between them. One failed head chirps on its own, or it stops the other heads answering a test on the landing.
- No power at a mains alarmA mains powered alarm uses the house supply and a battery inside the head. With the supply off and that battery spent, the test button does nothing and the light on the cover stays dark. Leave the base on the ceiling.
What can I check on a fire alarm safely?
You can press the test button, watch the light and note which head chirps. You leave every alarm on its base and you do not touch a cable.
- Press the test buttonPress the button on the cover once. A loud sound means the horn in that head works. Silence means that detector is not working. Step back once you have heard it, or once you have confirmed there is no sound.
- Which alarm is chirpingStand under each alarm and listen. One head chirping is that detector at fault. Several heads chirping in turn are interlinked alarms repeating one fault. Note the room for each head.
- The light on the coverAico and FireAngel alarms show a small light on the cover while the head has power. A dark face and a silent test button mean that alarm is dead. You do not twist the head off the base to look behind it.
- Smoke alarm or heat alarmRead the words on the cover. A smoke alarm sits on a landing or in a living room. A heat alarm sits in a kitchen and waits for heat, so cooking smoke does not set it off. A silent smoke alarm on the landing is the fault.
When should I book for a fire alarm fault?
Book Now when the test button stays silent, the chirp will not stop, or a rented home has a dead smoke alarm on a storey where people live.
- The test button stays silentYou pressed test and that alarm made no sound. The horn, the sensor or the power in that head has failed. Another press will not revive it. Book Now and leave the alarm on its base.
- The chirp will not stopA short beep every so often is a fault, not a full alarm. If it carries on after you have checked the hush button, that detector needs a test. Leave the head on the ceiling. Book Now.
- A rented home has a dead alarmIn a rented home, each storey where people live needs a smoke alarm that sounds on test. A silent alarm on a landing leaves that storey without a warning. Book Now so we test it and name the failed detector.
What happens on a fire alarm fault visit?
We find the alarm that failed, test it in place, and fit a replacement detector when you accept it. Any alarm that still sounds on test stays up.
- Which alarm failedWe ask which room chirps, which test button is silent, and whether the alarms are linked. We look at each smoke or heat alarm with you. Every head stays on its base until the tests show which one has failed.
- Test from the button and the lightWe press test on each alarm and watch the light on the cover. A head that stays silent is the failed detector. On interlinked Aico or FireAngel alarms we check whether the other heads answer that test.
- Name the fault before a new detectorWe tell you whether the sealed battery, the sensor or the link has failed. A sound alarm stays in place. We fit an Aico or FireAngel detector in that spot when you accept the replacement.
- Sound test and paperworkWe press test on the new detector and on any alarm linked to it. A heat alarm goes in a kitchen. A smoke alarm goes on a storey where people live. We leave the paperwork for the detector we have fitted.
What does a fire alarm fault cost?
The price covers finding the smoke or heat alarm that has failed, telling you what failed, and fitting the replacement detector when you accept it. The paperwork for that detector is included. The price changes with how many alarms we test, whether those alarms are interlinked, and how many Aico or FireAngel detectors need replacing.
From £110
Included in the installation
- Smoke alarm installation
- Heat alarm installation
- Work to the stated alarm layout
- A written price before work starts
- The relevant electrical paperwork when the work is complete
Not included automatically
- Maintenance after the alarms are fitted
- Fire alarm system installation
- Emergency electrician attendance out of hours
Ways to pay


- Pay by bank
- Bank transfer
- Testing one silent alarm takes less time than tracing a chirp across interlinked heads.
- We add an Aico or FireAngel detector only when the test shows that head has failed.
- You get the price for any replacement detector before that detector is fitted.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose Lighting Electrical
We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowCan I change the battery myself?
Many Aico and FireAngel alarms seal the battery inside, so there is nothing you can swap. Opening the head is unsafe on a mains alarm and can break the sensor. We replace the whole detector when that sealed battery has failed.
Will you replace every alarm in the house?
No. We test each smoke and heat alarm and replace the one that failed. A detector that still sounds on test stays where it is. We fit another head only where a living storey or a kitchen has no working alarm.
Do you fit a heat alarm in the kitchen?
Yes. We fit a heat alarm in a kitchen as part of Fire and smoke alarm installation, because cooking smoke sets off a smoke alarm. The landing still needs a smoke alarm that sounds on test.
Why is my alarm chirping when there is no smoke?
A chirp is a fault beep, not the full alarm sound. It usually means the sealed battery is spent or the sensor has failed. We test that head and replace it when you accept the new detector.
What paperwork do I get after the alarm is replaced?
We leave the paperwork for the detector we fitted when that work is done. Our NAPIT registration is named on that paperwork. We sound the new alarm on test before we finish.
Related problems
- Aluminium wiring in the houseAluminium cable overheats at loose joints. We test it, write the electrical installation condition report, and price any copper replacement separately.
- Automatic gate not openingA gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
- Bathroom fan stopped workingA stopped extractor fan means a seized motor, an open switch, or a fault on the circuit that feeds it.
- Brown marks on a socket or plugBrown marks on a socket or plug mean the connection has overheated, so that circuit stays off until it is tested.
- Burning plastic smell from electricsA burning plastic smell means the insulation on a live joint is getting hot, so that circuit stays switched off until it is tested.
- Burning smell from a socketA burning smell from a socket means a connection is overheating and that circuit should stay off until it is tested.
Sources
- HM Government: Approved Document B (Fire Safety)
- HM Government: smoke and carbon monoxide alarms for landlords
- Essex County Fire and Rescue Service: Smoke alarms
- Electrical Safety First: Safety Guidance
Updated 16 November 2026
