BG Electrical wiring accessories in Peterborough
Lighting Electrical fits and replaces BG Electrical sockets, switches, dimmers and fused spurs in Peterborough, checking the earth at each back box so every new faceplate works and sits flat.
Calls answered 24/7
- 10 years trading
Which BG Electrical accessories do we fit and repair?
We fit and replace BG Electrical wiring accessories: the sockets, switches, dimmers and spurs on your walls. Each one goes on a back box, the metal or plastic box in the wall behind the faceplate, and is tested once wired.
- BG sockets and USB socketsWe fit BG twin sockets, switched and unswitched, and BG sockets with built in USB charging ports. USB versions sit deeper in the wall, so we check the back box has room before the old socket comes off.
- BG light switches and dimmersWe fit BG plate switches, grid switches and dimmers. A grid switch is a plate built from separate switch modules, useful where one plate controls several rooms. Dimmers are matched to the lamps, because LED lamps on an older dimmer often flicker or buzz.
- BG spurs, cooker switches and outdoor socketsA fused spur is a switched outlet with its own fuse, used for fixed items such as a boiler or towel rail. We also fit BG 45 amp double pole switches for cookers and showers, which break both live and neutral, and BG weatherproof sockets outside.
- Faults we fix and what servicing involvesA wall accessory shows no fault codes. The faults are scorched or loose terminals, cracked plates, worn rockers, a blown fuse in a spur and a dimmer that buzzes. There is nothing inside to service, so the check is tight terminals, a sound plate and a correct earth.
What we do with BG Electrical accessories in each service
EICR
from £150
An EICR, the electrical safety report, looks behind a sample of BG sockets and switches. We check the terminals for heat marks, the earth at each faceplate and any cracked plate, and record anything that falls short.
Consumer unit replacement
from £450
Your BG accessories stay on the walls when the board changes. Once the new consumer unit, the box of breakers, is in, we test each circuit at its BG sockets and switches so every point reads correctly on the new protection.
House rewiring
from £2,400
A rewire ends with new accessories on every point. Where you pick BG Electrical, we fit its sockets, switches and fused spurs on new back boxes and test each one before that circuit goes live.
Electrical fault finding
from £75 an hour
A scorched BG socket or a switch that crackles is often where a fault first shows. We open the faceplate, test the terminals and the cable behind it, and replace the BG part only if that is what failed.
Lighting installation
from £65
New lights need a control on the wall. We fit BG plate switches or BG dimmers to suit the fittings, and check any dimmer is rated for LED lamps so the new lights run without flicker.
EV charger installation
from £750
The charge point itself is another make and runs on its own circuit. Where you want a socket outside beside it for a pressure washer or tools, we fit a BG weatherproof socket on a protected circuit.
BG Electrical socket installation
from £85
This is the main BG Electrical job. We fit BG twin sockets, USB sockets and switches in white or metal finishes, check the back box depth and the earth, then test each point before handing it back.
Emergency electrician
from £90 an hour
When a BG socket or switch is hot, smells of burning or has sparked, we isolate that circuit out of hours and make it safe. A matching BG part goes in on the visit when we carry one, or on a later booking.
Electrical testing and certificates
from £95
Portable appliance testing checks the kettles, leads and tools that plug into a BG socket, not the socket itself. Each appliance gets a pass or fail on the record, and the wall accessories fall under an EICR.
Smoke alarm installation
from £110
Mains smoke and heat alarms are another make. Where the layout calls for a local feed, we take it through a BG fused spur so the alarm circuit has its own fuse and a clear isolation point.
Appliance and heating connections
from £120
A cooker connects through a BG cooker control unit or a BG 45 amp double pole switch. We check that switch suits the cooker rating and the cable before the appliance is connected and tested.
Solar panel and battery storage installation
from £5,500
The panels, inverter and battery come from other makers. BG accessories only appear on the mains side, where a fused spur or isolator near the inverter is needed, and we fit that to the inverter maker's instructions.
Forklift charger installation
from £700
A forklift charger runs from an industrial isolator and plug, not a BG wall accessory. We fit the charger, its isolator and its circuit, and leave any BG sockets already in the bay as they are.
Commercial Lighting Installation
from £65
Shop and office lights need switching that copes with daily use. We fit BG grid switches where one plate runs several banks of lights, and BG metal plates where plastic would mark or crack.
Starlink installation
from £350
A Starlink router plugs into an ordinary socket, and the dish takes no BG parts. Where the router sits away from any socket, we add a BG socket on an existing circuit close to it.
Light switch or dimmer replacement
from £60
We take off the old control and fit a BG switch or dimmer on the existing back box. Dimmers are matched to the lamps, because many LED lamps need a dimmer built for LED loads to stop buzzing.
Minor works certificate
from £95
Adding a BG socket or fused spur to an existing circuit is a minor alteration. We test that circuit, then write the work, its position and the test results on the minor works certificate.
Extractor fan installation
from £180
The fan is another make. It usually takes power through a BG fan isolator, a three pole switch that cuts the live, switched live and neutral, so the fan can be worked on safely later.
Electric shower installation
from £220
An electric shower needs a double pole switch, either a pull cord or a wall switch outside the bathroom zones, the areas near water. We fit a BG 45 amp shower switch once its rating is checked against the shower.
Emergency lighting test & certificate
from £150
Emergency luminaires are other makes. We isolate their feed, watch each lamp run on battery and certify the result, while the BG sockets and switches on other circuits stay in service.
Immersion heater repair
from £70 an hour
An immersion is switched by a double pole switch near the cylinder. If that switch is a BG unit with scorched terminals or a stiff rocker, we replace it alongside the element or thermostat repair.
Battery storage installation
from £4,500
The battery and inverter come from the battery maker. Our work there is the circuit, the isolation and the tests, and a BG accessory goes in only where the installer instructions ask for a local mains switch.
Fire alarm system installation
from £1,400
A fire alarm panel needs a feed nobody can switch off by mistake. We take it through a BG unswitched fused spur, so the panel has its own fuse and no switch on the wall to turn off.
Cherry picker hire
The cherry picker involves no BG equipment. We bring the machine, set it up on firm ground and operate it, so high floodlights, signs and sensors can be reached from a stable platform.
Can a BG socket cut power to the whole house?
- No power in the whole houseYes, in some homes. A fault at a BG socket can trip an RCD, the device that cuts power when current leaks to earth, and on some boards one RCD covers every circuit. We reset it, then test each circuit to find the socket or switch behind the trip.
Other brands we work on
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Follow your job from booking to receipt
See when we're on our way, get your job report the moment we finish, and pay in seconds.
Track us on our way
See us on the map with a live arrival time.
Your job report, same day
See exactly what was done as soon as we finish.
Invoice and receipt in one place
Pay online in seconds, and your receipt is always there when you need it.
Why choose Lighting Electrical
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowCan you match new sockets to my existing BG Electrical ones?
Yes, where that BG finish is still made. We fit the same white moulded or metal plate as the rest of the room. If a range has ended, we use the closest current BG plate and show you before fitting.
Can I swap a BG socket for one with USB ports?
Usually, yes. BG USB sockets are deeper than plain ones, so a shallow back box may need replacing first. We check the box and the earth before the old socket comes off.
Why does my BG dimmer buzz with LED bulbs?
Older dimmers were built for filament lamps and struggle with the small load of LED bulbs. The usual cure is a BG dimmer rated for LED lamps, matched to the number of bulbs on that switch.
Is a scorched BG socket dangerous?
Yes, stop using it. Scorch marks usually mean a loose terminal or a plug drawing too much current, and the heat can damage the cable behind. We replace the socket and test the cable before the circuit goes back on.
Do BG sockets and switches need servicing?
No, there is nothing inside to service. Watch for cracked plates, warm faceplates or a rocker that sticks, and book a repair if you see one. The terminals behind them are checked during an EICR.




