Lights flickering in one room only
Lighting Electrical traces lights that flicker in one Peterborough room to the switch, the ceiling connection, the lamp or the dimmer on that circuit.
Calls answered 24/7
- 10 years trading
Why do lights flicker in one room only?
The fault is in that room, at a switch, a lamp, a ceiling joint or a dimmer. Other rooms stay steady because their own connections still hold, even on the same lighting breaker.
- A loose terminal in the room switchThe switch for that room clamps the lighting cables under small screws. A loose screw sparks as the lamps draw current, and the light dips. Switches in other rooms stay tight, so those lamps stay steady.
- A lamp or LED that is failingA filament lamp with a broken filament flashes as the ends touch. An LED lamp fails in its driver and flickers while the switch is sound. The same type of lamp in the next room can still burn steadily.
- A dimmer that fights the lampsA dimmer reduces brightness by chopping the supply to the lamps. LED lamps flicker when the dimmer was made for filament lamps. We fit a Varilight or MK Electric dimmer only when tests show the old dimmer has failed.
- A loose joint at the ceilingCables for the room meet inside the ceiling rose, the round base above a pendant. A loose connector there feeds only that room. The joint warms, the lamps flicker, and the rose can smell of hot plastic.
- Two switches controlling one lightSome rooms have two switches for one light. The extra cable between those switches is the strapper. A loose strapper flickers that light alone. Lamps on the same breaker in other rooms stay steady.
What can I check before I book?
You can watch which lamps dip, fit a cold lamp, and feel near the closed switch. The fuse board cover stays shut and no cable is touched.
- One lamp or every lamp in the roomTurn the room lights on and watch. One lamp dipping means that lamp or its holder. Every lamp in the room dipping together points to the switch, the dimmer or the joint that feeds the whole room.
- A lamp that is steady elsewhereSwitch off at the wall and let the lamp cool. Fit a lamp that is steady in another room. If the flicker continues, the lamp was not the cause. If it stops, leave the new lamp in and watch it.
- The dimmer from low to fullMove the dimmer from low to full brightness. Flicker at one position points to the dimmer or to lamps it cannot control. An ordinary switch in the next room that stays steady supports that.
- Warmth, a buzz or a hot smellHold the back of your hand near the switch plate. Do not touch the screws. Warmth, a buzz or a smell of hot plastic means a spark inside a loose joint. Switch that room off and leave the plate closed.
When should I book for a flickering room?
Book Now when a good lamp still flickers, or when the switch is warm, buzzing or smelling of hot plastic. A tired lamp that stops flickering after you replace it is only a lamp.
- A good lamp still flickersA lamp that is steady elsewhere still flickers in this room. The fault sits in the switch, the dimmer, the holder or the ceiling joint. Fitting more lamps will not remove it.
- The switch is hot, loud or smellyWarmth, a buzz or a smell of hot plastic means the joint is sparking. Sparking chars the cable behind the plate. Turn the room off with the switch and leave every screw in the plate.
- The lamp flares and then goes dullA lamp that flares very bright and then goes dull can be a loose neutral, the return path for the current. That fault can burn out the lamps in the room. Turn the room off at the wall switch.
What happens on a visit for a flickering room?
We test the lights in that room and name the failed part before a switch, a dimmer or a cable is changed. Any repair waits until you accept it.
- Which lamps dipped and whenWe ask which lamps dipped, whether the room has a dimmer, and what changed when you fitted another lamp. We look at the switch plate and the ceiling rose with you. No cover comes off until our tester reads the conductors as dead.
- Readings with the lighting breaker offWe open the lighting breaker so the cables are safe to test. Continuity shows whether the copper still connects. Insulation shows whether current leaks between live, neutral and earth. The readings point to the switch, the dimmer, the rose or the cable.
- The failed part named before a priceWe name the failed switch, dimmer, holder, joint or cable before anything is replaced. Parts that read as sound stay fitted. We confirm the earth path, which clears fault current, and the bonds on metal pipes before we price any larger job.
- The repair and the certificateYou accept the repair and we then fit the failed part. We test the lighting circuit once the work is finished. A minor works certificate follows when the circuit was altered, and it carries our NAPIT registration. An unsafe circuit stays off at its breaker.
What does a flickering room visit cost?
You pay for the time we spend on the flickering room. That time takes in the tests, the diagnosis we talk through, and the repair you have accepted. More time in the ceiling, a new dimmer or switch, or a minor works certificate moves the price. Emergency electrician is its own booking.
From £75 an hour
Included when agreed
- Testing at the board and along the failed circuit until the cause is named
- A spoken diagnosis before any part is swapped
- Repair of the failed joint, accessory, cable or protective device once you accept the hourly work
- Making the circuit safe if it cannot be left live that day
- A minor works certificate when the repair needs one
Not included automatically
- A full house rewire or a new consumer unit as the first step
- Solar, battery, EV charger or forklift charger work
- Guesswork replacement of parts that have not failed
Ways to pay


- Pay by bank
- Bank transfer
- Time rises when the loose joint is in the ceiling rose rather than in the wall switch.
- A failed dimmer is swapped for a Varilight or MK Electric dimmer, and a failed switch for BG Electrical, Contactum, Wylex or Hager.
- A new fuse board is quoted alone, and only after the lighting breaker itself has failed the tests.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose Lighting Electrical
We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowWill a new bulb stop the flicker in this room?
A worn lamp can be the only fault. When a lamp that is steady in another room still flickers here, the switch, dimmer, holder or ceiling joint is failing. We name that part, and we fit a replacement only after you accept the repair.
Do you change the dimmer before testing?
No. The dimmer stays in place while we test it on the lighting circuit. A dimmer that passes stays on the wall. We fit a Varilight or MK Electric dimmer only when the readings show the old one has failed, and only after you accept.
Will the other lights stay on during the visit?
Sockets and any lights on other breakers stay on. We switch off the lighting breaker that feeds the flickering room while we test those cables. Healthy breakers go back on after the readings. That lighting breaker stays off only when the circuit is unsafe.
Is a flicker in one room a fire risk?
A loose joint that sparks heats the switch and the cable behind it. A warm plate, a buzz or a smell of hot plastic means that room stays off. A lamp that flickers alone and then dies is a failed lamp. We still test the holder if the replacement flickers.
What certificate do I get after the lighting repair?
A minor works certificate follows when we change the circuit. It lists the tests for the finished repair and our NAPIT registration. An EICR is a wider inspection of the installation and is arranged as a separate job.
Related problems
- Automatic gate not openingA gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
- Buzzing sound in the wallA buzz inside a wall is a loose joint, a dimmer or a damaged cable on that circuit.
- Circuit breaker keeps trippingThe breaker keeps tripping because a fault is still on the circuit, in an appliance, a cable, a joint or the protective device.
- Consumer unit tripping with nothing plugged inThe consumer unit trips with nothing plugged in because fixed wiring or the safety switch is sending current to earth.
- Downstairs circuit keeps trippingThe downstairs breaker or RCD opens because a socket, light, cable or appliance on that floor is leaking or overloaded.
- Driveway lights not workingDriveway lights go dark when the outdoor circuit, a sensor or a lantern fails, while rooms on another breaker stay lit.
Sources
- Electrical Safety First: Safety Guidance
- BS 7671: IET Wiring Regulations (18th Edition)
- NICEIC: Householder Guidance
Updated 16 November 2026
