No power in the kitchen
No power in the kitchen means the socket circuit, the cooker circuit or the kitchen lights have opened. Lighting Electrical in Peterborough tests that circuit and names the failed part.
Calls answered 24/7
- 10 years trading
Why has the kitchen lost power?
The kitchen loses power when the socket circuit, the cooker circuit or the kitchen lights open, while other rooms stay on. A circuit is one cable run with its own breaker in the fuse board. The failed part is a breaker, a socket, a cooker connection or an appliance on that circuit.
- The kitchen socket breaker has openedKitchen sockets have their own breaker in the fuse board, separate from the lights. A breaker is the switch that opens when a circuit draws too much current or leaks to earth. Earth is the safety path that carries a fault away from you. A damaged lead or a burnt socket opens that breaker and the kitchen sockets go dead.
- A kitchen appliance is leaking to earthA fridge, a dishwasher or a kettle can leak current to earth and open the kitchen breaker. Pulling that plug lets the breaker hold and the sockets work. The faulty appliance stays unplugged.
- The cooker circuit has openedA cooker, oven or hob has its own circuit and a large switch on the wall. That circuit does not feed the sockets along the worktop. A loose joint at the cooker switch opens the cooker breaker. A fault in the cooker cord does the same. The sockets stay live.
- A socket or spur connection has failedA spur is a branch off the kitchen socket circuit that feeds one fixed appliance. The branch ends at a fused connection unit, a switch that holds a fuse. Heat loosens the joint in that switch. The appliance goes dead. Sockets further along the circuit go dead with it.
- Water has reached a kitchen socketSteam from a kettle and splashes beside the sink reach sockets on the worktop. Water across the contacts leaks to earth. An RCD switches off when current leaves a circuit. The kitchen breaker opens on that leak. An RCD that covers several circuits opens as well. Upstairs lights stay on when they sit on a different circuit.
What can I check safely in the kitchen?
You can see which kitchen points are dead. You can pull the plugs on portable appliances. You can read the breakers through the closed fuse board cover.
- See which kitchen points are deadTurn the kitchen light on. Try one socket with a lamp that already works in another room. Look at the cooker display. Dead sockets with a live light mean the socket circuit has opened. A dead cooker with live sockets means the cooker circuit has opened.
- Pull plugs and reset one breakerPull the plugs on the kettle, the toaster and the microwave. Leave a fitted fridge plugged in. Raise the kitchen breaker once if it is down and the fuse board is cool and quiet. If the breaker drops out again, leave it off.
- Read the breakers with the cover shutFind the breaker named for kitchen sockets or for the cooker. Read that name through the closed cover. A breaker sitting down is the circuit that opened. The cover stays on and the cables stay untouched.
- Look for heat, noise or brown marksA warm socket, a buzz or brown marks around the pin holes mean a joint is overheating. Stop using that socket. Leave the socket switch where it is. Keep away from the fuse board if the board smells of burning too.
- The cooker switch on the wallThe cooker switch is the wide switch above the worktop. See whether it is on. A blank cooker display with live sockets points to that switch or the cooker breaker. Leave the switch screws in place.
When should I book for a dead kitchen?
Book Now when the kitchen breaker will not stay up, a socket is hot or smells of burning, or the cooker is dead while the sockets still work. A spent lamp in one cool fitting is not this fault.
- The kitchen breaker will not holdThe breaker opens again after the portable plugs are out. The fault is still on the fixed wiring or in a fitted appliance. Another reset heats the breaker and the cable. Leave that breaker off and Book Now.
- A socket is hot or smells of burningHeat, a buzz or a burning smell at a socket or the fuse board means a joint is failing. Use the breaker handle on the front to switch that circuit off. Keep your hands off the socket screws and the board cover.
- The cooker is dead and sockets workA blank oven with working sockets means the cooker circuit has opened. The wall switch and the cooker breaker need a test. The socket circuit stays on during that test.
- Water has hit a socket or a switchA splash onto a live socket can send current to earth and hold the breaker open. With that breaker already off, wipe the outside of the face only. Book Now before anyone uses that circuit again.
What happens on a kitchen fault visit?
We test the dead kitchen circuit from the fuse board and name the failed part before we change anything. Healthy circuits stay on. Any repair waits until you accept it.
- Which points in the kitchen diedWe ask whether the sockets, the lights, the cooker or one appliance went off. We ask when it started. We read the kitchen breaker beside you while the cover stays shut. We note any plug you have already pulled.
- Tests on the dead kitchen circuitWe switch the kitchen circuit off at its breaker. A dead test measures the cable while it is off. Those results show whether the cable is shorted, broken or leaking to earth. We name the failed socket, joint, cable, breaker or appliance before a part is changed.
- The failed socket, spur or cooker switchWe take the cover off only the socket, fused connection unit or cooker switch that failed. We test each joint on that kitchen run before we move on. A sound socket stays shut. We test the cooker circuit apart from the socket circuit.
- Repair, paperwork and the next priceWe fit the failed part once you accept the repair. We test the circuit again. A minor works certificate records the change under our NAPIT registration. Before a further price, we test earthing, bonding and whether the supply can feed the kitchen load. Earthing is the fault path that lets a breaker open. Bonding joins metal pipes to the fuse board.
What does a dead kitchen visit cost?
The time we spend tracing a dead kitchen circuit sets the price. That time includes the tests, the spoken diagnosis and the start of the repair once you accept it. A burnt socket takes less time than a leak along the worktop. A replacement part, a minor works certificate or a fuse board replacement changes the price.
From £75 an hour
Included when agreed
- Testing at the board and along the failed circuit until the cause is named
- A spoken diagnosis before any part is swapped
- Repair of the failed joint, accessory, cable or protective device once you accept the hourly work
- Making the circuit safe if it cannot be left live that day
- A minor works certificate when the repair needs one
Not included automatically
- A full house rewire or a new consumer unit as the first step
- Solar, battery, EV charger or forklift charger work
- Guesswork replacement of parts that have not failed
Ways to pay


- Pay by bank
- Bank transfer
- We fit a socket, a breaker, a length of cable or a cooker connection only after the test shows it has failed.
- Fuse board replacement has a separate written price when the kitchen breaker or the board has failed.
- Emergency electrician is charged as its own job, separate from Electrical Fault Finding & Repair.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose Lighting Electrical
We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowCan the rest of the house stay on?
Yes. We leave every healthy circuit on and switch off only the failed kitchen circuit. That circuit goes back on after the repair, and it stays off if it cannot be left live.
Will a new fuse board fix the kitchen?
Only if the test shows the kitchen breaker or the board has failed. A sound board stays when the fault is a socket, a fused connection unit or the cooker switch. We price any board change on its own.
Do you repair the kitchen on the same visit?
We name the failed socket, connection, breaker or appliance before any part is fitted. The repair of that part goes ahead on the visit once you accept it. A fuse board change waits for a separate price.
What paperwork comes after a kitchen repair?
Where we change a socket, a cooker connection or a breaker, the minor works certificate covers that job. It lists the test results and our NAPIT registration. If we only switch the circuit off and change nothing, we write down the readings and the failed part.
What if a fridge or dishwasher caused the trip?
A fridge or a dishwasher can open the kitchen breaker by leaking current to earth. We test with that appliance unplugged and name it when the leak is in the appliance. The sockets go back on when the fixed wiring is sound and that appliance stays unplugged.
Related problems
- Automatic gate not openingA gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
- Buzzing sound in the wallA buzz inside a wall is a loose joint, a dimmer or a damaged cable on that circuit.
- Circuit breaker keeps trippingThe breaker keeps tripping because a fault is still on the circuit, in an appliance, a cable, a joint or the protective device.
- Consumer unit tripping with nothing plugged inThe consumer unit trips with nothing plugged in because fixed wiring or the safety switch is sending current to earth.
- Downstairs circuit keeps trippingThe downstairs breaker or RCD opens because a socket, light, cable or appliance on that floor is leaking or overloaded.
- Driveway lights not workingDriveway lights go dark when the outdoor circuit, a sensor or a lantern fails, while rooms on another breaker stay lit.
Sources
- Electrical Safety First: Safety Guidance
- BS 7671: IET Wiring Regulations (18th Edition)
- IET: BS 7671 Guidance Publications
Updated 16 November 2026
