Why is my plug socket buzzing

A buzzing plug socket means current is jumping a loose joint inside it. Lighting Electrical in Peterborough finds that joint on Electrical Fault Finding & Repair and names it before anything is changed.

Calls answered 24/7

  • 10 years trading

Why is my plug socket buzzing?

A plug socket buzzes when current jumps a poor connection or the pin grips loosen. The sound comes from the socket, the plug in it, or the breaker for that circuit.

  • Loose cable screws in the socketThe screws that hold the live, neutral and earth wires loosen as the socket warms and cools. Current jumps the small gap and the outlet buzzes. A kettle or heater makes that buzz louder because more current crosses the gap.
  • Worn grips on the plug pinsThe metal grips inside a socket tire and stop holding the pins tightly. The pins vibrate and the socket buzzes while a plug is in. A plug that falls out on its own shows the same wear.
  • A tired switch on the socketA switched socket has a switch on the front that feeds the pins. Burnt switch contacts buzz when the switch is on and an appliance is running. The buzz changes when you rock that switch.
  • A humming breaker in the fuse boardA breaker is the switch in the fuse board that guards one circuit. A loose wire under that breaker, or a tired breaker, hums in the board. You hear the same hum in the room when the board is close by.
  • A hum that belongs to the appliancePhone chargers, microwaves and fridges hum in the plug. Pull that plug and the socket goes quiet. The same hum in a second socket means the appliance is the noisy part, and the first socket is sound.

What can I check on a buzzing socket?

You can pull the plugs, listen, and look at the socket and the closed fuse board. Screws stay in and the board cover stays on.

  • Plugs out, then listen againTake every plug out of the buzzing socket, chargers included. Stand and listen. Silence means the noise was in a plug. A buzz that remains is in the socket or further back on the circuit.
  • Heat, brown marks and smellHover the back of your hand near the socket front. Do not touch the pin holes. Warm plastic, brown stains around the holes, or a smell of hot plastic means stop using that socket at once.
  • The same appliance in a quiet socketUse a socket that has been silent. Plug in the appliance that was in the noisy one. If the hum moves with the appliance, leave that appliance out. If only the first socket buzzes, the fault is there.
  • The breaker, seen through the coverFind the fuse board and leave the cover screwed on. See whether one switch is humming, warm or smelling of hot plastic. Use the switch handle only to turn that circuit off. Do not undo the cover.

When should I book for a buzzing socket?

Book Now if the buzz stays after every plug is out, or if the socket is warm, browned or smelling of hot plastic.

  • The buzz remains with no plugs inThe socket still buzzes after you have removed every plug. The live joint is failing. Turn the circuit off with the breaker handle and Book Now.
  • The socket is hot or smellsWarm plastic, brown pin holes or a burning smell means the joint is overheating. Leave every plug out. Turn the circuit off at the breaker and keep it off.
  • The noise is at the fuse boardThe hum is louder beside the fuse board than beside the socket. The breaker or the wire under it needs a test. Leave the cover on and Book Now.

What happens on a visit for a buzzing socket?

We find where the buzz is loudest, switch that circuit off, and name the failed part before a socket or breaker is changed.

  • We listen and note the plugsWe ask which socket buzzes, what was plugged in, and whether the noise grew with a kettle or a heater. We listen at that socket and beside the fuse board before any cover comes off.
  • We isolate the circuit and testWe turn the circuit off at the breaker. With the cable dead we measure the socket and the wires into it. The readings separate a loose screw, worn pin grips, a burnt switch and a breaker fault.
  • We name the part, then repairWe tell you the failed part in plain words. The repair of that part starts when you accept it. We fit a socket or breaker from MK Electric, BG Electrical, Contactum, Hager or Wylex only if the test shows it has failed.
  • We retest and write the certificateAfter the repair we test the circuit again. Where the circuit changed, the minor works certificate carries our NAPIT registration and the test results. Before any further price we check earthing, bonding and spare capacity on the supply. Earthing is the path that lets a breaker open on a fault. Bonding joins the metal pipes to that earth.

What does a buzzing socket visit cost?

The hourly price for Electrical Fault Finding & Repair covers the time spent on the buzzing socket. That includes the tests, the diagnosis we speak through with you, and the start of the repair once you accept it. A replacement part, a minor works certificate, a fuse board job or an emergency call changes the price.

From £75 an hour

Included when agreed

  • Testing at the board and along the failed circuit until the cause is named
  • A spoken diagnosis before any part is swapped
  • Repair of the failed joint, accessory, cable or protective device once you accept the hourly work
  • Making the circuit safe if it cannot be left live that day
  • A minor works certificate when the repair needs one

Not included automatically

  • A full house rewire or a new consumer unit as the first step
  • Solar, battery, EV charger or forklift charger work
  • Guesswork replacement of parts that have not failed

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Klarna
  • Pay by bank
  • Bank transfer
  • Tracing a buzz that appears only with a kettle on takes longer than a buzz you can hear with every plug removed.
  • Sockets and breakers from MK Electric, BG Electrical, Contactum, Hager or Wylex are fitted only after the test shows a failure.
  • Fuse board replacement and emergency electrician attendance are each priced as their own job.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose Lighting Electrical

We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.

Photo of Valandi KotorriValandi KotorriElectrician
Reviews
61
Rating
4.7
Trading since
2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”

Valandi Kotorri, Lighting Electrical

Book Now

Questions before a buzzing socket visit

Still have a question?

Is a buzzing plug socket dangerous?

Yes. Current is jumping a loose joint or worn pin grips, and that point heats the cable behind the socket. Turn the circuit off at the breaker handle. Book Now rather than keep a kettle or heater in that outlet.

Can I leave the socket in use until the visit?

No. Each time a load runs, the loose joint heats a little more. Move the appliance to a socket that is cool and silent. If the buzz continues with nothing plugged in, switch that circuit off at the breaker.

Will you fit a new socket before you test?

No. We test the dead circuit and name the loose screw, the worn socket or the breaker. The repair starts only when you accept it. A socket that passes the test stays on the wall.

What paperwork do I get after the repair?

A change to the socket circuit is recorded on a minor works certificate. The certificate shows the tests and our NAPIT registration. An EICR is separate: it is a full inspection of the installation, not the record of this one repair.

Will a new fuse board stop the buzzing?

Only if the tests put the noise on the breaker or on the wires into the board. A loose screw in one socket still buzzes after a board change. We price fuse board replacement on its own when the tests show the board is the failed part.

Related problems

Sources

Updated 16 November 2026

Book or ask a question

Calls answered 24/7

Areas we cover (2)