Plug socket stopped working
A plug socket that has stopped working has lost power at that outlet or in the plug. Lighting Electrical in Peterborough tests the socket and names the failed part before any repair.
Calls answered 24/7
- 10 years trading
Why has one plug socket stopped working?
One plug socket stops working when the fault is in that outlet, its switch, or the plug, while the rest of the circuit stays live.
- The socket switch is off or wornA switched socket has a switch on the face that feeds the pins. The switch left down leaves that outlet dead. A worn switch opens inside the face while the cable behind it is still live.
- Burnt contacts behind the socket faceA loose terminal heats when a heater or kettle draws current. The heat chars the contacts and that outlet goes dead. Other sockets on the same circuit can still work.
- A break on a spur to one socketA spur is a single cable that leaves the main socket circuit and feeds one outlet. A loose joint on that spur kills only that socket. Sockets on the main run stay live.
- The fuse inside the plugA plug fuse is the small cartridge in a UK plug that protects the appliance flex. A blown fuse stops that appliance at every socket. The outlet itself is still live.
- Water or a cracked socket faceWater across a socket face or a cracked plate leaks current at that outlet. That socket stops working. A large leak also opens the RCD, the safety switch that cuts power when current leaves the circuit.
What can I check on a dead socket?
You can test the plug, the socket switch and a known appliance with the socket face left shut.
- The switch on the socketLift the switch on the socket face. A switched socket passes power only when that switch is up. Leave the face screws in place.
- The same appliance in another socketPlug the appliance into a socket that you know works. If it runs there, the first outlet has the fault. If it stays dead, the fault is in the appliance or its plug.
- The fuse in the plugOpen the plug cover with the appliance unplugged. Fit a new fuse of the same amp rating printed on the old fuse. Never use wire or foil in place of the fuse. Put the cover back before you plug in.
- Marks, heat or a smellLook at the pin holes and the plastic around them. Brown marks, a warm face or a burning smell mean the joint is failing. Stop using that socket and leave its switch down.
When should I book for a dead socket?
Book Now when the socket stays dead after those checks, or when the face is hot, cracked or smelling of burning.
- The outlet stays deadThe appliance works in another socket and the socket switch is up. The fault is in that outlet or the cable that feeds only that point. Further plug swaps will not restore it.
- Heat, cracks or a burning smellA warm face, brown marks or a smell of burning means the contacts are arcing. Arcing is a spark jumping across a loose joint. Leave the socket switch down and keep the plug out.
- The breaker opens when you use itA breaker is the switch in the fuse board that guards one circuit. If it drops when this socket is used, the fault is more than a blown plug fuse. Leave that breaker off.
What happens during a dead socket visit?
We test the dead socket first and name the failed part before we change the face or the cable.
- Which socket failed and what was plugged inWe ask which outlet died and which appliance was in it. We ask whether other sockets in the room still work. We look at the fuse board with the cover shut and note any switch that has opened.
- Tests at that socket and at the next oneWe isolate the circuit at the breaker. A dead test checks the cable while it is off. We compare the dead socket with a live one on the same circuit. Those readings separate a failed face, a plug, a spur and a break in the cable.
- The face comes off only after the testWe remove the screws on the socket the test has named. We check the terminals, the switch and the conductors in that box. A socket that tests sound stays shut. We tell you the failed part before we fit a new one.
- Repair after you accept itWe fit the failed socket, fuse or short length of cable once you accept the repair. We test the circuit again. A minor works certificate records a change to the circuit under our NAPIT registration. We check earthing and bonding before any further price. Earthing is the path that lets a breaker open. Bonding links metal pipes to the fuse board.
What does a dead socket visit cost?
Electrical Fault Finding & Repair is charged by the hour. The price covers tests on the dead socket, the diagnosis we give you, and the repair after you accept it. A replacement socket, a longer cable repair, or a minor works certificate changes the price.
From £75 an hour
Included when agreed
- Testing at the board and along the failed circuit until the cause is named
- A spoken diagnosis before any part is swapped
- Repair of the failed joint, accessory, cable or protective device once you accept the hourly work
- Making the circuit safe if it cannot be left live that day
- A minor works certificate when the repair needs one
Not included automatically
- A full house rewire or a new consumer unit as the first step
- Solar, battery, EV charger or forklift charger work
- Guesswork replacement of parts that have not failed
Ways to pay


- Pay by bank
- Bank transfer
- A socket from MK Electric, BG Electrical or Varilight is fitted only when the test shows that outlet has failed.
- Fuse board replacement is priced as its own job when the tests show the board has failed.
- Emergency electrician attendance is priced separately from this fault finding visit.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose Lighting Electrical
We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowWill you change the socket before you find the fault?
No. We test the outlet and name the failed socket, switch, spur or plug first. The repair starts after you accept it. A socket that tests sound stays on the wall.
Is a dead socket the same as a dead circuit?
No. One dead socket with others still live points to that outlet or its spur. A whole room of dead sockets points to the breaker or the cable leaving the fuse board. We test so the repair matches the finding.
Do I get paperwork after the socket is repaired?
Where the repair changes the circuit, you receive a minor works certificate. The certificate lists the tests and our NAPIT registration. An EICR inspects the whole installation and is booked as its own job.
Can I keep using the other sockets?
Yes. We switch off only the circuit that feeds the failed socket while we test. Sockets on other circuits stay in use. We put the circuit back on after the repair, or we leave it off if it cannot be left live.
What if the plug works in another room?
The outlet you first tried is the failed part, or the spur that feeds it is. We test that point and repair it after you accept the work. The appliance stays in service on a sound socket.
Related problems
- Automatic gate not openingA gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
- Buzzing sound in the wallA buzz inside a wall is a loose joint, a dimmer or a damaged cable on that circuit.
- Circuit breaker keeps trippingThe breaker keeps tripping because a fault is still on the circuit, in an appliance, a cable, a joint or the protective device.
- Consumer unit tripping with nothing plugged inThe consumer unit trips with nothing plugged in because fixed wiring or the safety switch is sending current to earth.
- Downstairs circuit keeps trippingThe downstairs breaker or RCD opens because a socket, light, cable or appliance on that floor is leaking or overloaded.
- Driveway lights not workingDriveway lights go dark when the outdoor circuit, a sensor or a lantern fails, while rooms on another breaker stay lit.
Sources
- Electrical Safety First: Safety Guidance
- NICEIC: Householder Guidance
- BS 7671: IET Wiring Regulations (18th Edition)
Updated 16 November 2026
