Water on electrics: what to do

Water on a cable, socket or fuse board means that circuit stays off until a test shows it is dry. Lighting Electrical in Peterborough isolates the wet part and tests it before that circuit is switched on.

Calls answered 24/7

  • 10 years trading

Why does water on electrics cut the power?

Water cuts the power because it lets current leak from the cable or fitting to earth. Earth is the safety path that carries fault current away from you. A safety switch called an RCD opens when it sees that leak.

  • Rain in a wall lantern or outside socketRain fills a cracked wall lantern or a weatherproof socket and lies across the contacts. A gland is the seal where the cable enters that fitting. A loose gland lets the water in. Current leaks to earth and the RCD opens.
  • A leak into a ceiling lightWater from a bath, a loft tank or a slipped roof tile runs into a ceiling light. It joins the live conductor to earth inside the fitting. Live means the conductor that is at supply voltage in normal use. That circuit opens. A dry room on another breaker stays lit.
  • A splash on a socket or switchWater from a sink, a washing machine hose or a burst pipe reaches a socket or a light switch. The wet contacts leak current to earth. The breaker for that circuit opens. A breaker is the switch in the fuse board that guards one circuit.
  • Water running into the fuse boardA leak above the fuse board runs into the breakers and the busbar. The busbar is the metal bar that feeds every breaker. Water on that bar leaks across several circuits at once. More of the property goes off together.
  • Steam on a bathroom light or fanSteam from a shower settles on a light, an extractor fan or a pull cord that is open to the room. A film of moisture links the contacts to earth. The bathroom circuit opens. A dry circuit elsewhere stays on.

What can I check safely with water on the electrics?

You can look from a dry floor and read a dry fuse board with dry hands. Every cover stays on. You keep away from wet metal and from any water on the floor.

  • Whether the floor around the board is wetYou stay on a dry floor before you go near any switch. Water around the fuse board means you leave the board alone. You Book Now and keep people out of that water.
  • Which breaker handle is downYou read the breaker handles through the closed cover. A handle that sits down marks the circuit that has opened. You leave a wet board untouched and you reset nothing while water is still on a fitting.
  • Where the water is sittingYou note drips on a ceiling light, a wet socket, a wet wall lantern or staining above the fuse board. The fitting stays shut. You do not remove a socket front or a ceiling rose.
  • A burning smell, a buzz or heatA burning smell, a buzz or a warm fuse board means a joint is overheating in the wet area. You stop and leave the wet circuit off. You do not mop around a socket while its breaker is still up.

When should I book for water on electrics?

Book Now when water has reached a fitting or the fuse board, or when a breaker will not stay up after the drip has stopped. A single dry lamp that has failed is a different fault.

  • Water in the fuse boardWater in the fuse board can bridge live parts to the metal case. You leave the main switch off if dry hands already turned it off. The cover stays on. We test the board before any breaker is put back up.
  • The breaker will not stay upThe breaker opens again after the drip has stopped. The cable or the fitting is still leaking to earth. Leave that breaker down and Book Now.
  • A wet socket, light or lanternA wet socket, a wet ceiling light or a lantern holding rain stays off. Other breakers that are up and on a dry board can stay on. The wet circuit needs a test before it is used again.
  • A shock from a wet fittingA shock from a switch, a socket or an appliance means current has left the cable. You stay clear of the fitting and the water. If a person is hurt you call an ambulance, then Book Now for the circuit.

What happens on a visit for water on electrics?

We isolate the wet circuit, test it and name the wet part before any part is changed. The circuit goes back on only when those tests show it is dry and sound.

  • Where the water met the wiringWe ask which room got wet and which breakers opened. We look at the fuse board with the cover still on. We switch off the wet circuit, or the main switch if the board is wet. A tester shows the circuit is dead before any screw is undone.
  • An insulation test on the dead circuitAn insulation test checks whether the plastic round the copper still holds current in. We run it with the circuit switched off. A low result means water is still in a fitting, a joint or the cable. A sound result means that length of cable is dry.
  • The wet fitting after it tests deadWe open only the socket, the light, the wall lantern or the board part that the test shows is wet. A sound fitting is dried and put back. A failed fitting is replaced after you accept the repair. Parts from Hager, Wylex, Contactum, BG Electrical or MK Electric are used only when the test shows the old part has failed.
  • Paperwork and any later repairWe test the circuit again after the repair. A minor works certificate records any change to that circuit and carries our NAPIT registration. A circuit that still leaks stays off. Any fuse board change is written as a later job. We check earthing, bonding and whether the supply can feed the existing load before we write that later price.

What does water on electrics cost?

The price covers Emergency electrician attendance, isolation of the wet circuit and the tests that show whether the cable is dry. A longer test, a replacement fitting or a minor works certificate changes the price. Fuse board replacement and Electrical Fault Finding & Repair are written as separate jobs.

From £90 an hour

Included in the call-out

  • Attendance at the property in Peterborough or a nearby Essex town
  • Isolation of the failed circuit, fitting or board
  • Fault finding on the circuit that has gone down
  • Temporary making safe so the rest of the installation can be used where that is possible
  • A written note of what failed and what work should follow

Not included automatically

  • A full house rewire or a planned consumer unit replacement on the same visit unless already quoted
  • Parts we do not carry in the van, which we price in writing before we fit them
  • Work on another trade such as gas, plumbing or structural fabric

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Klarna
  • Pay by bank
  • Bank transfer
  • Drying one outside lantern takes less time than testing a fuse board that has water across several breakers.
  • A fitting or breaker from Hager, Wylex, Contactum, BG Electrical or MK Electric is added only after the test shows it has failed.
  • Out of hours Emergency electrician attendance is charged separately from Electrical Fault Finding & Repair in opening hours.

View the emergency call-out cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose Lighting Electrical

We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.

Photo of Valandi KotorriValandi KotorriElectrician
Reviews
61
Rating
4.7
Trading since
2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”

Valandi Kotorri, Lighting Electrical

Book Now

Questions about water on electrics

Still have a question?

Should I switch the whole fuse board off?

Switch the main switch off when water is on the fuse board and you can reach a dry handle without standing in water. Leave the board alone when the floor around it is wet. We isolate the wet circuits on the visit and test them before they go back on.

Can I turn the breaker on after I dry the fitting?

No. Wiping the face of a fitting leaves water in the cable and the joint behind it. We run an insulation test with the circuit dead. The breaker goes up only when that test is sound.

Will you change the fuse board because water got in?

Only when the test shows the board itself has failed. A wet wall lantern can leave a sound fuse board in place. Fuse board replacement is written up afterwards as its own job.

Do I get paperwork after the repair?

A minor works certificate follows when we alter the circuit. It lists the test results for that repair and our NAPIT registration. When nothing is changed and the circuit stays off, we record the readings and the wet part.

Can the rest of the property stay on?

Yes, when the fuse board is dry and the wet circuit has its own breaker. We switch off that circuit and leave the healthy breakers up. A wet fuse board stays off at the main switch until the board tests sound.

Related problems

Sources

Updated 16 November 2026

Book or ask a question

Calls answered 24/7

Areas we cover (1)