Loose or wobbly plug socket
A loose plug socket means the faceplate moves on the wall or the contacts no longer grip the plug. Lighting Electrical in Peterborough replaces that socket after testing the circuit.
Calls answered 24/7
- 10 years trading
Why does a plug socket go loose?
A plug socket goes loose when the faceplate no longer sits firm on the wall box, or when the contacts inside no longer grip the plug pins.
- Screws no longer hold the faceplateThe faceplate is the plastic front of the socket. Screws clamp it to the wall box, the case set into the wall. Loose screws or stripped threads let the whole plate rock as a plug goes in.
- Worn contacts let the plug wobbleThe contacts are the metal grips behind the pin holes. Repeated use springs those grips apart. The faceplate stays still while the plug rocks and sparks on the pins.
- The wall box has shiftedLoose fixing screws let the wall box shift in the wall. The faceplate moves with the box. The cable then flexes at the terminals, and a terminal is the screw that clamps each wire.
- Sparking has weakened the jointA plug that keeps moving sparks at the pins. That spark is arcing, and it heats the terminal. The heat softens the plastic and the socket grips the plug even less.
- A cracked plate or bent plug pinsA cracked faceplate lets the plug sit crooked in the holes. Bent pins make a firm socket feel loose. We change the cracked socket. A sound socket stays on the wall when the plug is the failed part.
What can I check on a loose socket safely?
You can see whether the plate or the plug moves, and you can feel for heat, while every screw stays in and the fuse board cover stays shut.
- Whether the plate or the plug movesPress the faceplate gently with the plug removed. A plate that rocks, or a gap at the wall, shows the box fixing has failed. A still plate with a rocking plug shows the contacts are worn.
- Heat, marks or noise at the plasticUse the back of your hand near the plastic, not on the pins. Warm plastic, brown marks, a buzz or a burning smell means stop there. Switch off the socket switch if it has one. Pull the plug out.
- The same plug in a firm socketTry that plug in a socket that does not move. A plug that sits firm there, and wobbles only in the loose one, points to the socket. A plug that wobbles in every socket has bent pins.
- The next socket along the wallLook at the next socket on the same wall. One moving plate points to that wall box alone. Several moving plates need a test of the circuit before a socket is changed.
When should I book for a wobbly socket?
Book Now when the plug sparks, the faceplate is coming off the wall, or the plastic is hot.
- The plug sparks or falls outA spark as you touch the plug is arcing at the contacts. Leave the plug out. Turn that socket off at its own switch. Book Now.
- The faceplate is coming off the wallA gap that shows the metal box or the cable leaves a live part open. Keep your hands clear of the gap. Switch the circuit off with the handle on the fuse board. Book Now.
- The socket is hot or smells of burningHeat or brown marks show the terminal is already burning. Another plug in that socket heats the joint further. Leave the socket switched off until we test it.
- Moving the plug knocks the power offIf moving the plug knocks off the switch on the fuse board, current is leaking to earth. That switch is an RCD. Leave it off and Book Now.
What happens on a loose socket visit?
We isolate the circuit for the loose socket, find whether the plate, the wall box or the contacts have failed, and fit the replacement.
- Which socket movesWe ask which socket moves and whether it sparked. We switch that circuit off at the fuse board. A tester shows the socket is dead before the first screw comes out.
- The plate, the box and the wiresThe faceplate comes off so we can see the threads, the box fixings and each terminal. A sound socket on that circuit stays on the wall. Scorched wire shows the pins have been sparking.
- The new socket and the checksA worn socket is swapped for a new one from MK Electric, BG Electrical, Contactum, Hager or Wylex. We refix the wall box before the new faceplate goes on. We check earthing, bonding and whether the supply will carry the load before any further price. Earthing returns fault current to the fuse board. Bonding joins metal pipes to that path.
- Switching on and the certificateThe circuit goes back on and we check the new socket holds a plug. Where the circuit has changed, a minor works certificate records the tests and our NAPIT registration. The socket switch stays off if the circuit is unsafe to switch on.
What does a loose socket repair cost?
Socket and switch installation covers replacement of the one loose socket on the quotation. That price pays for removing the faceplate, fitting the new socket and testing the circuit. A second socket, a new wall box or plaster repair changes the price.
From £85
Included when agreed
- Fitting a new socket or replacing an existing socket at the quoted position
- Changing a light switch or damaged faceplate when that line is on the quotation
- Checking earthing, bonding and whether the circuit can carry the extra load
- The relevant electrical paperwork when the work is complete
- Removing packaging and leaving the room ready to use the new point
Not included automatically
- Plastering, painting or making good after any chasing
- A house rewire when the circuit cannot take another point
- A consumer unit replacement unless that is quoted as its own job
Ways to pay


- Pay by bank
- Bank transfer
- The replacement socket is added when the plate or the contacts have failed.
- Plaster and paint after a wall box is refixed sit on their own line, apart from the electrical price.
- Electrical Fault Finding & Repair is priced on its own when several sockets on the circuit have failed.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose Lighting Electrical
We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowCan I keep plugging things into a wobbly socket?
No. Movement at the pins keeps sparking inside the wall box, and that heat builds in the terminal. Switch the socket off and leave the plug out until we replace it.
Will you only tighten the faceplate screws?
We tighten the screws only when the threads and the terminals test sound. Worn contacts or stripped threads need a new socket. A loose wall box is refixed before that new socket goes on.
Will the power go off in the whole house?
No. We switch off only the circuit that feeds the loose socket, and the other circuits stay on. We switch that circuit back on after the new socket is tested.
Do I get paperwork after the socket is replaced?
A replacement that changes the circuit comes with a minor works certificate. The certificate lists the test results and our NAPIT registration. An EICR inspects the whole installation and is quoted as its own job.
Do you replace a loose outdoor socket?
Yes. A loose outdoor socket is done as socket installation or replacement, with a weatherproof faceplate. Extra protection for the outdoor wiring is written on the quotation before work starts. Earthing and bonding are checked on that circuit too.
Related problems
- Cracked plug socketA cracked plug socket stays unused until the face is replaced and the terminals behind it are tested.
- Extension lead getting hotA hot extension lead is overloaded, so the appliance needs a fixed socket instead of that lead.
- One side of a double socket not workingOne outlet on a double socket goes dead when its contacts or switch fail and the other outlet still has power.
- Sparks when turning on a socketA spark as the socket switch closes means a worn socket contact or a damaged plug.
- USB socket stopped chargingA failed charger inside the plate stops the USB ports while the plug outlets on that plate stay live.
- Yellowed or discoloured socket face plateEven yellowing across a cool face plate is aged plastic. Brown marks around the pin holes mean the socket is heating and should be replaced.
Sources
Updated 16 November 2026
