Signs your fuse box needs upgrading
A fuse box needs upgrading when it still uses fuse wire, lacks an RCD, or has no spare way for a new circuit. Lighting Electrical in Peterborough fits a new consumer unit and tests the circuits from it.
Calls answered 24/7
- 10 years trading
Why does a fuse box need upgrading?
A fuse box needs upgrading because fuse wire and a board with no RCD cannot see a leak to earth, and a full board cannot take another circuit. The age of a house on its own does not show whether that board is fit to keep.
- Fuse wire is still in the boardA rewirable fuse holds a piece of wire that melts on overload. It does not switch off when current leaks to earth. An RCD, short for residual current device, does switch off on that leak. We fit a consumer unit, the modern fuse board, with RCD protection or an RCBO, a breaker and an RCD in one device for a single circuit.
- Breakers but no RCDSome boards already use breakers and still have no RCD. A breaker opens when a circuit draws too much current. It stays closed on a small leak to earth. We change that board so the circuits have RCD or RCBO protection.
- No spare way for a new circuitAn electric shower, an EV charger, a solar inverter or extra kitchen sockets needs its own breaker. A full board has no space left for that breaker. We fit a larger Hager, Wylex, Contactum, BG Electrical or MK Electric consumer unit so each existing circuit connects cleanly. The new circuit is a separate job.
- An EICR names the consumer unitAn EICR is an Electrical Installation Condition Report. It can record missing RCD protection, a damaged busbar or marks that do not match the circuits. A busbar is the live bar that feeds the breakers. We replace the consumer unit and test the circuits that leave it.
- Heat, a crack or a burning smellA warm cover, a buzz or brown marks show a joint in the fuse box is overheating. The cover stays screwed shut. A burning smell means you switch that circuit off at the breaker handle and Book Now.
What can you check safely on a fuse box?
You can read the front of the fuse box, press a test button and note heat or smell. The cover stays on and the cables stay untouched.
- Fuse wire or switches on the frontLook at the front without removing a screw. A strip of fuse wire or a cartridge fuse means the board still relies on fuse wire. A row of switches means breakers are already fitted. Either way the cover stays shut.
- The RCD test buttonAn RCD has a marked test button on the front. Press it once while you stand on a dry floor. The switch should open and the circuits it covers should go off, then you close it again. No test button means the board has no RCD. If the switch does not open, stop there.
- Empty spaces beside the breakersCount the blank spaces next to the switches while the cover stays on. No space left, and a shower, charger or extra sockets planned, means the board is full. You do not add a cable or a breaker yourself.
- Heat, noise or brown marksFeel only the outside of a cool looking cover, and stop if it is warm. A buzz, brown stains or a burning smell are visible or obvious without opening anything. Leave the screws in and switch off a smelly circuit at its handle.
When should you book a fuse box upgrade?
Book Now when the fuse box still uses fuse wire, has no RCD, is full, or is hot, cracked or smelling of burning.
- Fuse wire or no RCDThe board still uses fuse wire, or it has breakers but no residual current device. Another piece of fuse wire does not add that protection. Book Now and we price fuse board replacement from the board you have.
- A hot, cracked or smelly coverHeat, a crack, a buzz or a burning smell means a joint in the board is failing. Leave the cover closed and keep that circuit off at the handle. Book Now so the supply can be isolated before the board is removed.
- An EICR names the consumer unitThe report records missing RCD protection, damaged parts or marks that do not match the circuits. Book Now for fuse board replacement and a retest of the circuits that feed from the board. Other repairs named in the report stay as separate work.
- No room for the next circuitAn EV charger, solar inverter, electric shower or extra sockets needs a spare way. A full board means a larger consumer unit comes before that circuit. Book Now for the board change. The new circuit is priced as its own job.
What happens on a fuse board visit?
We isolate the supply, fit the new consumer unit and test each circuit before the power returns. The written price is confirmed before isolation.
- Confirm the price and isolateWe confirm the written price with you and look at the meter tails. Meter tails are the thick cables between the electricity meter and the fuse box. We isolate the incoming supply, and the power stays off while the board is changed. Stored items in front of the cupboard need moving first.
- Remove the old board and fit the new oneThe old fuse box comes off the wall. We mount the new consumer unit, connect the tails and the earth, and place each circuit on its breaker. Each way is marked as it is connected. The cables are dressed in so every termination is clear.
- Test earthing, bonding and each circuitWe check the earthing, the bonding and whether the supply will carry another load before any further price. Earthing is the path fault current takes so a breaker can open. Bonding joins metal pipes to that earth. We then test each circuit from the new consumer unit, and a circuit that fails stays off for a separate price.
- Certificate and NAPIT notificationWe restore the supply and check the lights and sockets on circuits that passed the tests. The electrical certificate records the consumer unit change. We notify that work through our NAPIT registration.
What does a fuse board upgrade cost?
The price covers taking out the old fuse box, fitting the new consumer unit and testing the circuits that leave it. A metal enclosure, extra circuits or a tight cupboard changes the labour. A circuit that fails its test is priced on its own. The written price is confirmed before the supply is isolated.
From £450
Included when agreed
- Isolation of the incoming supply and removal of the existing fuse board
- Supply and fitting of a new consumer unit with RCD or RCBO protection to suit the circuits
- Reconnection of existing circuits and labelling of each way
- Dead and live tests on the circuits that feed from the new board
- An electrical certificate and notification through NAPIT where the work requires it
Not included automatically
- Rewiring damaged cables found in walls, lofts or under floors
- New sockets, lights, showers or chargers that need extra circuits
- Making good plaster, paint or kitchen units around the cupboard
Ways to pay


- Pay by bank
- Bank transfer
- A straightforward domestic board sets the base price, and a metal enclosure, extra ways or a tight cupboard adds labour.
- Burnt cable, a high earth reading or a failed circuit is written up separately from the board change.
- A new shower, charger or socket circuit, and repairs to plaster or paint, are priced as separate jobs.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose Lighting Electrical
We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowWill you replace a fuse box that still has fuse wire?
Yes. We take off the rewirable board and place each circuit on a breaker with RCD or RCBO protection. Testing and the electrical certificate cover that board change, and any damaged cable is priced on its own.
Do I need a certificate when the consumer unit is changed?
Yes. A fuse board change is notifiable electrical work. We issue the electrical certificate and notify the job through our NAPIT registration.
Can you change the fuse board in a rented home?
Yes. Landlords ask us after an EICR or when a tenant reports fuses that keep opening. We carry out fuse board replacement once the occupant has arranged access, and the certificate follows the work.
Will a new fuse board stop my trips?
A new board stops the trips only when the tests show the old board is the failed part. A damaged cable or a faulty appliance can still open a new RCBO. We name that part and price the repair on its own.
Which consumer unit will you fit?
We fit a Hager, Wylex, Contactum, BG Electrical or MK Electric consumer unit chosen for the circuits. The written price names that unit before we isolate the supply. A metal enclosure changes the price when the installation needs one.
Related problems
- Fuse box in the bathroom: is it legal?A consumer unit inside a bathroom is not permitted and has to be moved outside that room.
- Old fuse box: do I need to upgrade?An old fuse box needs an upgrade when it still uses fuse wire or has no residual current protection.
- Still got rewirable fuses?A rewirable fuse box relies on fuse wire and has no residual current device, so the board is replaced and every circuit is tested.
- Unsatisfactory EICR: what happens next?An unsatisfactory EICR means a C1, a C2 or further investigation needs remedial work, and Lighting Electrical writes a price for those repairs.
- Aluminium wiring in the houseAluminium cable overheats at loose joints. We test it, write the electrical installation condition report, and price any copper replacement separately.
- Automatic gate not openingA gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
Sources
- Electrical Safety First: Replacing a consumer unit
- IET: BS 7671 Guidance Publications
- GOV.UK: Building work, replacements and repairs to your home
Updated 16 November 2026
