Still got rewirable fuses?
Yes. A rewirable fuse box protects a circuit only by melting a strand of fuse wire. Lighting Electrical in Peterborough replaces that board with a consumer unit, tests every circuit and issues the certificate.
Calls answered 24/7
- 10 years trading
Why does a rewirable fuse box need changing?
A rewirable fuse box needs changing because the only protection is a strand of fuse wire that melts on overload. A residual current device, called an RCD, is missing. An RCD cuts the power when current leaks to earth.
- Fuse wire only melts on overloadThe carrier holds a short strand of fuse wire for that circuit. The strand melts when the current stays too high. A leak to earth leaves the strand whole, so the circuit stays live.
- No residual current deviceNothing on a rewirable board measures current leaking to earth. A damaged cable or a wet fitting can keep feeding the circuit. An RCD on a modern consumer unit opens on that leak.
- The wrong strand in the carrierA thicker strand survives more current than the cable is built to carry. The cable then heats in the wall while the carrier still looks intact. The strand must match the rating printed on the carrier.
- A loose carrier runs hotA loose or tarnished carrier sparks when the circuit draws current. The carrier body cracks and the case browns around it. That heat stays in the board.
- One blown fuse kills the circuitWhen the strand melts, every light or socket on that carrier goes off together. There is no switch to reset. The circuit stays dead until a new strand is fitted.
What can I check on a rewirable fuse box?
You can check the closed board from the front, the rating printed on each carrier, and whether an RCD button is there. You leave the cover on. You leave every carrier in its slot.
- The carriers on the frontRewirable carriers are small blocks across the front of the board. The rating is printed on the carrier, commonly 5 amp, 15 amp or 30 amp. A consumer unit has a row of switches in their place.
- No button marked testAn RCD has a button marked T or Test on the front of the board. A rewirable board has carriers and no test button. Without that button the board cannot cut power on a leak to earth.
- Heat, noise or brown marksYou look for a hot case, a buzz, or brown marks around one carrier. Those signs mean the contact is failing. You leave the cover shut and stop using the circuit that carrier feeds.
- Which rooms went offYou note whether the lights, the sockets or both died when the fuse opened. Each carrier feeds one circuit. That note shows which circuit we test first.
When should I book for rewirable fuses?
Book Now when the fuse wire keeps melting, the board smells of burning or runs hot, or the circuits need a residual current device.
- The same fuse keeps meltingThe same carrier opens again after a new strand of fuse wire. The fault is still on that circuit. A thicker strand lets the cable overheat in the wall while the carrier holds.
- The board is hot or smells of burningBrown marks, a buzz or a smell of hot plastic mean a contact is sparking. The spark chars the carrier and the case. You leave that circuit unused and Book Now.
- The circuits need an RCDA new electric shower, an EV charger or extra sockets needs a residual current device. Rewirable carriers cannot provide one. Book Now so the circuits can move onto a protected consumer unit.
- A cracked carrierA cracked carrier leaves the metal contacts poorly held at the front of the board. You do not push the carrier back in. You leave that circuit off and Book Now.
What happens when rewirable fuses are replaced?
We isolate the supply, remove the rewirable board and connect each existing circuit to a breaker in a new consumer unit.
- The price, the earth and the supplyWe look at the carriers with you and write the price for the swap. Before that price is fixed we test the earthing and the bonding, and we check the supply can carry the load. Earthing is the metal path that carries fault current away from you. Bonding joins metal pipes to that path.
- Isolation and removalWe isolate the incoming supply. The rewirable board then comes off the wall. The meter tails, the thick cables from the meter, are checked before they enter the new consumer unit. The house has no power while this is open.
- The new consumer unitWe fit a Hager, Wylex, Contactum, BG Electrical or MK Electric consumer unit sized for the existing circuits. Each fuse moves onto a breaker with RCD or RCBO protection. An RCBO is one device that guards a single circuit against overload and against current leaking to earth. Each way is marked as the cable lands.
- Tests and the certificateWe test each circuit while it is dead, then again when it is live. A circuit that passes is switched back on. You get the electrical certificate, and we notify the board change through our NAPIT registration. A circuit that fails stays off.
What does replacing rewirable fuses cost?
The price covers isolating the supply, removing the rewirable board, fitting a consumer unit with RCD or RCBO protection, and testing the circuits from that unit. A metal case, extra ways or a board in a small cupboard changes the labour. Burnt cable or a circuit that fails its test is further work on its own written price. We write the price down before we isolate the supply.
From £450
Included when agreed
- Isolation of the incoming supply and removal of the existing fuse board
- Supply and fitting of a new consumer unit with RCD or RCBO protection to suit the circuits
- Reconnection of existing circuits and labelling of each way
- Dead and live tests on the circuits that feed from the new board
- An electrical certificate and notification through NAPIT where the work requires it
Not included automatically
- Rewiring damaged cables found in walls, lofts or under floors
- New sockets, lights, showers or chargers that need extra circuits
- Making good plaster, paint or kitchen units around the cupboard
Ways to pay


- Pay by bank
- Bank transfer
- Plaster, paint and cupboard repairs around the board sit outside this price.
- A new shower, cooker or EV charger circuit is priced as its own job.
- Fuse board replacement includes the certificate and the NAPIT notification for the board change.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose Lighting Electrical
We work with Hager, Wylex, Contactum, BG Electrical, MK Electric, Varilight, myenergi, Ohme, Hypervolt, Andersen, Aico, FireAngel and Mira.
- Reviews
- 61
- Rating
- 4.7
- Trading since
- 2016
“Ten years on Colchester housing stock and I have seen most of it: terraces where the lighting circuit has been extended once too often, boards fitted before RCDs were standard, new builds with sockets nowhere near the kitchen. I check the earthing, the bonding and whether the supply will carry another load before I price anything, because the age of a house settles nothing on its own.”
Valandi Kotorri, Lighting Electrical
Book NowCan I fit new fuse wire and keep this board?
New fuse wire only puts back the circuit that melted. The board still has no residual current device, so a leak to earth leaves the circuit live. We change the rewirable board for a consumer unit and test each circuit.
Is the whole house off during the change?
Yes. The incoming supply is isolated before the rewirable board comes off the wall. We switch a circuit back on after it passes its tests. A circuit that fails stays off.
Do I get paperwork for the new consumer unit?
Yes. A consumer unit change in a home is notifiable electrical work. We issue the electrical certificate and notify the job through our NAPIT registration.
What if one circuit fails the test?
We name the failed cable, joint or fitting and leave that circuit off. The board change does not include House Rewiring. Any repair has its own written price, given before that work starts.
Which consumer unit will you fit?
We fit Hager, Wylex, Contactum, BG Electrical or MK Electric, matched to the circuits on the old board. Each circuit gets a breaker with RCD or RCBO protection. Each way is marked before the cover goes back on.
Related problems
- Fuse box in the bathroom: is it legal?A consumer unit inside a bathroom is not permitted and has to be moved outside that room.
- Old fuse box: do I need to upgrade?An old fuse box needs an upgrade when it still uses fuse wire or has no residual current protection.
- Signs your fuse box needs upgradingA fuse box needs upgrading when it has fuse wire, no RCD, no spare ways, or a hot scorched cover.
- Unsatisfactory EICR: what happens next?An unsatisfactory EICR means a C1, a C2 or further investigation needs remedial work, and Lighting Electrical writes a price for those repairs.
- Aluminium wiring in the houseAluminium cable overheats at loose joints. We test it, write the electrical installation condition report, and price any copper replacement separately.
- Automatic gate not openingA gate that will not move has lost its supply, its safety beam or its motor control, so the outdoor circuit needs a test.
Sources
- Electrical Safety First: Best Practice Guides
- BS 7671: IET Wiring Regulations (18th Edition)
- GOV.UK: Building work, replacements and repairs to your home
Updated 16 November 2026
